Summary for Test 2023-03-15-1-1
Test performed: ASTM F606-21Project Information
| Project Identifiers | Project ID: 993279 DEA: 010E0904 EFIS: 0113000123 |
|---|---|
| DIST-CO-RTE-PM | 01-MEN-20-33.3/34.4 |
| Award Date | 05/06/2022 |
| Closeout Date | Not set |
| Work Description | CONSTRUCT NEW BRIDGE, REMOVE TWO BRIDGES, EARTHWORK AND PAVING. (Bridge No. 10-0310) |
| Location Description | MENDOCINO COUNTY NEAR UKIAH FROM 0.3 MILE WEST OF RUSSIAN RIVER BRIDGE AND OVERHEAD TO 0.3 MILE EAST OF COUNTY ROAD 144 |
| QA Service Level | 1 (Verified on 10/04/2021) |
Sample Information
| Sample Taken Date | 03/15/2023 | Sample Unique Key | 1 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 03/21/2023 |
| Sample type | Quality Control | A brief description of the sample | 5/8x3-1/2 assembly |
| The quantity of what the sample constitutes | 55 | From where was the sample collected | Distributor |
| First name of sampler or witnessed by | Oscar | Last name of sampler or witnessed by | Vizcaino |
| Title of sampler | Telephone number of sampler | 16787558969 | |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | St Louis Screw and Bolt | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | B378-009-23 | Structure unique identifier | |
| Structure name | Bid Item | Not set |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | TT0162967 |
|---|---|---|---|
| Heat Number(s) | 10434800, 5804907405, 219376 and 10589380 | Nut Mfg. Lot Number(s) | 36449-5804907405 |
| Washer Mfg. Lot Number(s) | 19382 | Bolt Specification | A325-1 |
| Bolt Length(s) | 3-1/2" | Nut Specification | A563-DH |
| Washer Specification | F436-1, Steel 1060 | Finish | Mech Galv. |
| Diameter/Size | 5/8" | Bolt Mfg. Lot Number | M5478 |
| Rocap Test Requirement(s) | Lubricant Requirements(s) | ||
| Washer Inner Diameter(s) |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-03-15-1
DIME Test ID: 2023-03-15-1-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Test Release Date: 2023-03-28
Test Results
Number of Bolt Samples: 1
Input Type: Measured
Tester's full name: rmacias
Date of test: 03/22/2023
UTM: 450kip
Temperature: no data
| Num | Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Wedge Angle (deg) | Comments | Tested By |
|---|---|---|---|---|---|---|---|---|
| 1 | 1 | M5478 | 0.6250 | 32272 | 143.55 | 10.00 | A325 Wedge Tensile | rmacias |
General comments (publicly viewable) (Max 1000 characters): A325 Wedge Tensile
Test Graph
Source: Bluehill Data Point FileTest was verified on 3/28/2023 ✔