DIME - Sample Record for DIME Sample ID 2023-03-15-1

DIME » All Projects » Project - DEA: 010E0904 » Sample 2023-03-15-1 » Sample Details

Sample Record

Owner Lab

CT HQ - QASI Bay Area Field Office

DIME Sample ID 2023-03-15-1

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 993279 DEA: 010E0904 EFIS: 0113000123
DIST-CO-RTE-PM	01-MEN-20-33.3/34.4
Award Date	05/06/2022
Closeout Date	Not set
Work Description	CONSTRUCT NEW BRIDGE, REMOVE TWO BRIDGES, EARTHWORK AND PAVING. (Bridge No. 10-0310)
Location Description	MENDOCINO COUNTY NEAR UKIAH FROM 0.3 MILE WEST OF RUSSIAN RIVER BRIDGE AND OVERHEAD TO 0.3 MILE EAST OF COUNTY ROAD 144
QA Service Level	1 (Verified on 10/04/2021)

Sample Information

Sample Taken Date	03/15/2023	Sample Unique Key	1
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	03/21/2023
Sample type	Quality Control	A brief description of the sample	5/8x3-1/2 assembly
The quantity of what the sample constitutes	55	From where was the sample collected	Distributor
First name of sampler or witnessed by	Oscar	Last name of sampler or witnessed by	Vizcaino
Title of sampler		Telephone number of sampler	16787558969
Laboratory sample identification		Linked DIME Sample ID
The fabricator/manufacturer/facility name	St Louis Screw and Bolt	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form	B378-009-23	Structure unique identifier
Structure name

Material Information

Material Type	SMTL TM3 - Fastener Assembly	Rocap Number(s)	TT0162967
Heat Number(s)	10434800, 5804907405, 219376 and 10589380	Nut Mfg. Lot Number(s)	36449-5804907405
Washer Mfg. Lot Number(s)	19382	Bolt Specification	A325-1
Bolt Length(s)	3-1/2"	Nut Specification	A563-DH
Washer Specification	F436-1, Steel 1060	Finish	Mech Galv.
Diameter/Size	5/8"	Bolt Mfg. Lot Number	M5478
Rocap Test Requirement(s)		Lubricant Requirements(s)

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2023-03-15-1-1	ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	rmacias, CT HQ - Sacramento Structural Materials Testing Laboratory	03/22/2023	rmacias	Yes	03/28/2023	A325 Wedge Tensile
2023-03-15-1-2	ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	<None>, CT HQ - Sacramento Structural Materials Testing Laboratory	03/22/2023	<None>	Yes	03/28/2023	A563 Nut Proof
2023-03-15-1-3	ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory	03/23/2023	Andrew Auvinen	Yes	03/28/2023
2023-03-15-1-4	ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory	03/23/2023	Andrew Auvinen	Yes	03/28/2023
2023-03-15-1-5	ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory	03/23/2023	Andrew Auvinen	Yes	03/28/2023
2023-03-15-1-6	ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory	03/23/2023	Andrew Auvinen	Yes	03/28/2023
2023-03-15-1-7	ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory	03/23/2023	Andrew Auvinen	Yes	03/28/2023
2023-03-15-1-8	ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory	03/23/2023	Andrew Auvinen	Yes	03/28/2023
2023-03-15-1-9	ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory	03/23/2023	Andrew Auvinen	Yes	03/28/2023
2023-03-15-1-10	ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory	03/23/2023	Andrew Auvinen	Yes	03/28/2023

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2023-03-15-1-1 ASTM F606-21 (Verified)
DIME Test ID: 2023-03-15-1-2 ASTM F606-21 (Verified)
DIME Test ID: 2023-03-15-1-3 ASME B1.2-83r17 (Verified)
DIME Test ID: 2023-03-15-1-4 ASME B1.2-83r17 (Verified)
DIME Test ID: 2023-03-15-1-5 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-03-15-1-6 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-03-15-1-7 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-03-15-1-8 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-03-15-1-9 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-03-15-1-10 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-03-15-1-11 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-03-15-1-12 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-03-15-1-13 ASTM E18-20 (Verified)
DIME Test ID: 2023-03-15-1-14 ASTM E18-20 (Verified)