Summary for Test 2023-03-03-23-1
Test performed: ASTM F606-21Project Information
| Project Identifiers | Project ID: 215649 DEA: 043G4884 EFIS: 0412000088 |
|---|---|
| DIST-CO-RTE-PM | 04-SM-92-R14.4/R18.8 |
| Award Date | 09/01/2022 |
| Closeout Date | 10/09/2024 |
| Work Description | CLEAN AND PAINT STEEL BRIDGE TOWERS, REPLACE HIGH STRENGTH BOLTS. |
| Location Description | SAN MATEO COUNTY IN FOSTER CITY FROM SAN MATEO-HAYWARD BRIDGE TO ALAMEDA COUNTY LINE |
| QA Service Level | 1 (Verified on 03/29/2021) |
Sample Information
| Sample Taken Date | 03/03/2023 | Sample Unique Key | 23 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 03/07/2023 | Sample type | Verification |
| A brief description of the sample | Rusted bolt assembly - Upper portion | The quantity of what the sample constitutes | 3 |
| From where was the sample collected | Job Site | First name of sampler or witnessed by | Gilel |
| Last name of sampler or witnessed by | Klebocuov | Title of sampler | SR |
| Telephone number of sampler | 6504455551 | Laboratory sample identification | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Unknown | |
| Transportation Laboratory (TL) Number | C668879 | Inspector Lot Number from the Transportation Laboratory (TL) Form | |
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | |
|---|---|---|---|
| Heat Number(s) | Nut Mfg. Lot Number(s) | N/A | |
| Washer Mfg. Lot Number(s) | N/A | Bolt Specification | A325 |
| Bolt Length(s) | 2-3/4" | Nut Specification | U DH3 |
| Washer Specification | N/A | Finish | |
| Diameter/Size | 7/8" | Bolt Mfg. Lot Number | N/A |
| Rocap Test Requirement(s) | Lubricant Requirements(s) | ||
| Washer Inner Diameter(s) | Bolt Mill Supplier | Not set | |
| Nut Mill Supplier | Not set | Washer Mill Supplier | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-03-03-23
DIME Test ID: 2023-03-03-23-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Test Release Date: 2023-03-14
Test Results
Number of Bolt Samples: 1
Input Type: Measured
Tester's full name: spaine
Date of test: 03/10/2023
UTM: 400KIP
Temperature: 72 f
| Num | Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Wedge Angle (deg) | Comments | Tested By |
|---|---|---|---|---|---|---|---|---|
| 1 | 7 | na | 0.8750 | 63456 | 282.27 | 10.00 | A325 Wedge Tensile | spaine |
General comments (publicly viewable) (Max 1000 characters): A325 Wedge Tensile
Test Graph
Source: Bluehill Data Point FileTest was verified on 3/14/2023 ✔