Summary for Test 2022-10-19-3-1
Test performed: ASTM F606-21Project Information
| Project Identifiers | Project ID: 214590 DEA: 043G4744 EFIS: 0412000074 |
|---|---|
| DIST-CO-RTE-PM | 04-MRN,MRN-580-6.9/7.8,0.0/2.5 |
| Award Date | 01/14/2021 |
| Closeout Date | 08/19/2024 |
| Work Description | CLEAN AND PAINT STRUCTURAL STEEL BRIDGE. |
| Location Description | CONTRA COSTA AND MARIN COUNTIES IN RICHMOND AND SAN RAFAEL FROM 0.8 MILE WEST OF TOLL PLAZA TO 0.1 MILE EAST OF MAIN STREET |
| QA Service Level | 1 (Verified on 02/18/2020) |
Sample Information
| Sample Taken Date | 10/19/2022 | Sample Unique Key | 3 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 11/03/2022 | Sample type | Quality Assurance |
| A brief description of the sample | A325 fastener assemblies 3/4 x 21/2 and 2" | The quantity of what the sample constitutes | 32 sets A325 |
| From where was the sample collected | Fabricator | First name of sampler or witnessed by | Greg |
| Last name of sampler or witnessed by | Thompson | Title of sampler | Associate Steel Inspector |
| Telephone number of sampler | 510-376-7155 cell | Laboratory sample identification | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | C&K Johnson | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | B9-161-22 | |
| Structure unique identifier | Structure name | Richmond San Rafael Bridge | |
| Bid Item | Not set |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | 470641BR 471674CR |
|---|---|---|---|
| Heat Number(s) | 1000215318 1000215972 | Nut Mfg. Lot Number(s) | Nucor 474422A |
| Washer Mfg. Lot Number(s) | 121289 | Bolt Specification | ASTM A325 |
| Bolt Length(s) | 2.5" ; 2" | Nut Specification | ASTM A563 |
| Washer Specification | ASTM F436 | Finish | HDG |
| Diameter/Size | 3/4 | Bolt Mfg. Lot Number | 470641B Nucor 471674C Nucor |
| Rocap Test Requirement(s) | yes | Lubricant Requirements(s) | yes |
| Washer Inner Diameter(s) | Bolt Mill Supplier | Not set | |
| Nut Mill Supplier | Not set | Washer Mill Supplier | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2022-10-19-3
DIME Test ID: 2022-10-19-3-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Test Release Date: 2022-11-07
Test Results
Number of Bolt Samples: 1
Input Type: Measured
Tester's full name: spaine
Date of test: 11/02/2022
UTM: 450kip
Temperature: no data
| Num | Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Wedge Angle (deg) | Comments | Tested By |
|---|---|---|---|---|---|---|---|---|
| 1 | 1A | 470641B | 0.7500 | 47291 | 210.36 | 10.00 | A325 Wedge Tensile | spaine |
General comments (publicly viewable) (Max 1000 characters): A325 Wedge Tensile
Test Graph
Source: Bluehill Data Point FileTest was verified on 11/7/2022 ✔