DIME - Test Summary

Summary for Test 2022-07-25-83-2

Test performed: CTM 523-July 2012

Project Identifiers	Project ID: 213707 DEA: 081C38U4 EFIS: 0817000196
DIST-CO-RTE-PM	08-RIV-10-6.7/R25.1
Award Date	11/26/2019
Closeout Date	11/01/2023
Work Description	Remove concrete pavement and base, and place HMA and JPCP
Location Description	ROUTE 10/60 SEPARATION IN BEAUMONT TO ROUTE 10/111 SEPARATION NEAR CABAZON.
QA Service Level	1 (Verified on 01/09/2020)

Sample Taken Date	07/25/2022	Sample Unique Key	83
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	07/26/2022
Sample type	Quality Assurance	A brief description of the sample	JPCP beams
The quantity of what the sample constitutes	4 Beams	From where was the sample collected	Job Site
First name of sampler or witnessed by	Nathan / Ruben	Last name of sampler or witnessed by	Ogbasellasie / Lopez
Title of sampler		Telephone number of sampler
Laboratory sample identification	213JA1, 213JA2, 213JB1, 213JB2	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Coffman Specialties, Inc	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Type	Concrete	The concrete mix design number	1906-2
The truck number from where the sample was collected		The batch plant ticket number from where the sample was collected	52
Concrete batch plant		The fabricator/manufacturer designation for the sample
A detailed description of where the material sample was collected	Back of Truck	Where the material sample would have been placed if not sampled
From Lot No.		Bag Lot No.

DIME Sample ID: 2022-07-25-83

DIME Test ID: 2022-07-25-83-2

Testing Lab: CT D08 - Fontana Field Testing Laboratory

Test Method: CTM 523-July 2012: Method of Test for Flexural Strength of Concrete

Test Release Date: 2022-09-26

What test method is being used?: Third-Point Loading

Fracture initiates in the tension surface: Within the Middle Third of the Span Length

Lab procedure used: Method B

Input Type: Calculated

Tester's full name: R. Mekail, M. Haque

Date of test: 08/04/2022

Identification number: 213JA2

Width of specimen: 5.9375 inch

Depth of specimen: 6.0625 inch

Span length of specimen: 18 inch

Maximum load applied: 5995 lb

Curing history and apparent moisture condition of the specimen: Curing Room, Moist

If specimen was capped, ground or if leather shims were used: No

Defects in specimen: No

Age of specimen: 10 days

Modulus of rupture: 520 psi

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 9/26/2022 ✔