Summary for Test 2022-07-19-64-1
Test performed: AASHTO T315-20Project Information
| Project Identifiers | Project ID: 215682 DEA: 031H1904 EFIS: 0316000065 |
|---|---|
| DIST-CO-RTE-PM | 03-SAC-80,244-M9.6/12.9,0.0/T0.8 |
| Award Date | 06/18/2021 |
| Closeout Date | 04/07/2025 |
| Work Description | COLD PLANE AC PAVEMENT, PLACE RHMA AND INDIVIDUAL SLAB REPLACEMENT. |
| Location Description | SACRAMENTO COUNTY IN AND NEAR SACRAMENTO ON ROUTE 80 FROM 0.2 MILE EAST OF LONGVIEW DRIVE OVERCROSSING TO 0.4 MILE EAST OF MADISON AVENUE OVERCROSSING AND ON ROUTE 244 FROM 0.3 MILE NORTH OF AUBURN BOULEVARD TO CONNECTOR TO ROUTE 80 |
| QA Service Level | 1 (Verified on 05/17/2021) |
Sample Information
| Sample Taken Date | 07/19/2022 | Sample Unique Key | 64 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/27/2022 |
| Sample type | Department Acceptance | A brief description of the sample | PG 64-16 (Valero) |
| The quantity of what the sample constitutes | 1 Can | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Jacob | Last name of sampler or witnessed by | Gregory |
| Title of sampler | Materials Inspector | Telephone number of sampler | |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Teichert Perkins | Transportation Laboratory (TL) Number | Not Provided |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Asphalt Binder | Performance Grade | PG 64-16 |
|---|---|---|---|
| Modified | No | Lot number | 1 |
| Sublot number | 1 | Tank number | |
| Time of sample | HMA Supplier | Teichert Perkins | |
| Certified Asphalt Supplier | Valero Marketing & Supply - Benicia CA | Multigrade | Yes |
| Multigrade Type | PG 64-16 / PG 64-10 | Asphalt Binder Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2022-07-19-64
DIME Test ID: 2022-07-19-64-1
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2022-08-22
Test Results
Phase: Original binder
Input Type: Measured
Tester's full name: Juan Gomez
Date of test: 08/22/2022
Test Plate Diameter: 25 mm
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 12.00 %
Stress Amplitude: 0.175 kPa
Phase Angle (δ) (for the 10 cycles): 85.0 degree
Complex Modulus (G*) (for the 10 measurements): 1.457 kPa
Test Temperature (Specimen 1): 64.0 C
Dynamic Shear, G*/sin(δ): 1.46 kPa
General comments (publicly viewable) (Max 1000 characters): OG
Test was verified on 8/22/2022 ✔