Summary for Test 2022-08-09-12-7
Test performed: AASHTO T335-09r13Project Information
| Project Identifiers | Project ID: 993847 DEA: 081M8604 EFIS: 0822000056 |
|---|---|
| DIST-CO-RTE-PM | 08-SBD-15-180.2/186.2 |
| Award Date | 06/23/2022 |
| Closeout Date | 12/12/2022 |
| Work Description | COLD PLANE AC PAVEMENT AND PLACE RUBBERIZED HMA (GAP GRADED). |
| Location Description | SAN BERNARDINO COUNTY ABOUT 43 MILES NORTH OF BAKER FROM 0.5 MILE SOUTH OF YATES WELL ROAD OVERCROSSING TO NEVADA STATE LINE |
| QA Service Level | 1 (Verified on 12/05/2022) |
Sample Information
| Sample Taken Date | 08/09/2022 | Sample Unique Key | 12 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 08/10/2022 | Sample type | Verification |
| A brief description of the sample | Aggregate | The quantity of what the sample constitutes | 6 - 5 gallon buckets |
| From where was the sample collected | Source | First name of sampler or witnessed by | Mark |
| Last name of sampler or witnessed by | Daniels | Title of sampler | Cunsultant |
| Telephone number of sampler | Laboratory sample identification | 22-JMF-0118 | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Blue Diamond | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | Unknown |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Plant | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2022-08-09-12
DIME Test ID: 2022-08-09-12-7
Testing Lab: CT HQ - Sacramento Aggregate Testing Laboratory
Test Method: AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)
Test Release Date: 2022-08-12
Test Results
Method: 1 - Combined Fracture Determination
Aggregate Size and Fracture Type: Coarse 1 and 2 Faced and Fine 1 Faced
Input Type: Measured
Tester's full name: Ryan Kester
Date of test: 08/12/2022
Mass of fractured, coarse, 2 faced particles tested: 967.4 g
Mass of questionable, coarse, 2 faced particles tested: 40.5 g
Mass of unfractured, coarse, 2 faced particles tested: 49.8 g
Mass of fractured, coarse, 1 faced particles tested: 1016.5 g
Mass of questionable, coarse, 1 faced particles tested: 26.9 g
Mass of unfractured, coarse, 1 faced particles tested: 14.3 g
Mass of fractured, fine, 1 faced particles tested: 26 g
Mass of questionable, fine, 1 faced particles tested: 0.4 g
Mass of unfractured, fine, 1 faced particles tested: 0 g
Percentage of questionable, coarse, 2 faced particles tested: 4 %
Percentage of questionable, coarse, 1 faced particles tested: 3 %
Percentage of questionable, fine, 1 faced particles tested: 2 %
Percentage of fractured, coarse, 2 faced particles tested: 93 %
Percentage of fractured, coarse, 1 faced particles tested: 97 %
Percentage of fractured, fine, 1 faced particles tested: 99 %
General comments (publicly viewable) (Max 1000 characters): Crushed particles, coarse aggregate One fractured face and Crushed particles, coarse
aggregate Two fractured faces - Method 1 Crushed particles, fine aggregate (Passing No. 4 sieve and retained on No. 8 sieve) One fractured face - Method 2
Test was verified on 8/12/2022 ✔