DIME - Sample Record for DIME Sample ID 2022-08-09-12

DIME » All Projects » Project - DEA: 081M8604 » Sample 2022-08-09-12 » Sample Details

Sample Record

Owner Lab

CT HQ - Sacramento Aggregate Testing Laboratory

DIME Sample ID 2022-08-09-12

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 993847 DEA: 081M8604 EFIS: 0822000056
DIST-CO-RTE-PM	08-SBD-15-180.2/186.2
Award Date	06/23/2022
Closeout Date	12/12/2022
Work Description	COLD PLANE AC PAVEMENT AND PLACE RUBBERIZED HMA (GAP GRADED).
Location Description	SAN BERNARDINO COUNTY ABOUT 43 MILES NORTH OF BAKER FROM 0.5 MILE SOUTH OF YATES WELL ROAD OVERCROSSING TO NEVADA STATE LINE
QA Service Level	1 (Verified on 12/05/2022)

Sample Information

Sample Taken Date	08/09/2022	Sample Unique Key	12
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	08/10/2022
Sample type	Verification	A brief description of the sample	Aggregate
The quantity of what the sample constitutes	6 - 5 gallon buckets	From where was the sample collected	Source
First name of sampler or witnessed by	Mark	Last name of sampler or witnessed by	Daniels
Title of sampler	Cunsultant	Telephone number of sampler
Laboratory sample identification	22-JMF-0118	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Blue Diamond	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Information

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	Unknown
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Plant
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2022-08-09-12-1	AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)	Ryan Kester/Jay Horton, CT HQ - Sacramento Aggregate Testing Laboratory	08/11/2022	Bang Nguyen	Yes	08/11/2022
2022-08-09-12-2	AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)	Ryan Kester, CT HQ - Sacramento Aggregate Testing Laboratory	08/12/2022	Bang Nguyen	Yes	08/12/2022	Bulk specific gravity (SSD) of fine aggregate, Bulk specific gravity of fine aggregate, Apparent specific gravity of fine aggregate, Apparent specific gravity of supplemental fines, Absorption of fine aggregate
2022-08-09-12-3	AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)	Bang Nguyen, CT HQ - Sacramento Aggregate Testing Laboratory	08/12/2022	Bang Nguyen	Yes	08/12/2022	Bulk specific gravity (oven dry) of coarse aggregate and Absorption of coarse aggregate
2022-08-09-12-4	AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)	Ryan Kester/ Jay Horton, CT HQ - Sacramento Aggregate Testing Laboratory	08/12/2022	Bang Nguyen	Yes	08/12/2022	Los Angeles Rattler, Loss at 100 and 500 Rev.
2022-08-09-12-5	AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)	Ryan Kester, CT HQ - Sacramento Aggregate Testing Laboratory	08/11/2022	Bang Nguyen	Yes	08/11/2022	Sand equivalent (min)
2022-08-09-12-6	AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)	Ryan Kester, CT HQ - Sacramento Aggregate Testing Laboratory	08/12/2022	Bang Nguyen	Yes	08/12/2022	Method A
2022-08-09-12-7	AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)	Ryan Kester, CT HQ - Sacramento Aggregate Testing Laboratory	08/12/2022	Bang Nguyen	Yes	08/12/2022	Crushed particles, coarse aggregate One fractured face and Crushed particles, coarse aggregate Two fractured faces - Method 1 Crushed particles, fine aggregate (Passing No. 4 sieve and retained on No. 8 sieve) One fractured face - Method 2
2022-08-09-12-8	ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)	Jay Horton, CT HQ - Sacramento Aggregate Testing Laboratory	08/12/2022	Bang Nguyen	Yes	08/12/2022	Flat and elongated particles (% by mass at 5:1)

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2022-08-09-12-1 AASHTO T27-14 (Verified)
DIME Test ID: 2022-08-09-12-2 AASHTO T84-14 (Verified)
DIME Test ID: 2022-08-09-12-3 AASHTO T85-13 (Verified)
DIME Test ID: 2022-08-09-12-4 AASHTO T96-02r10 (Verified)
DIME Test ID: 2022-08-09-12-5 AASHTO T176-08 (Verified)
DIME Test ID: 2022-08-09-12-6 AASHTO T304-11 (Verified)
DIME Test ID: 2022-08-09-12-7 AASHTO T335-09r13 (Verified)
DIME Test ID: 2022-08-09-12-8 ASTM D4791-10 (Verified)