DIME - Test Summary

Summary for Test 2022-03-01-6-6

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 215257 DEA: 11056374 EFIS: 1117000087
DIST-CO-RTE-PM	11-SD-11-0.6/2.7
Award Date	02/16/2021
Closeout Date	Not set
Work Description	CONSTRUCT INTERCHANGE, PLACE JPCP, HMA, AND INSTALL LIGHTING.
Location Description	SAN DIEGO COUNTY NEAR SAN DIEGO FROM 0.2 MILE WEST OF SANYO AVENUE UNDERCROSSING TO 1.2 MILE EAST OF ENRICO FERMI DRIVE OVERCROSSING
QA Service Level	1 (Verified on 11/25/2020)

Sample Taken Date	03/01/2022	Sample Unique Key	6
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	03/01/2022
Sample type	Quality Assurance	A brief description of the sample	3/4" HMA PSU
The quantity of what the sample constitutes	3 bags, 12 boxes, 3 cans	From where was the sample collected	Source
First name of sampler or witnessed by	David	Last name of sampler or witnessed by	Walker
Title of sampler		Telephone number of sampler	8582480978
Laboratory sample identification	4136-PSU	Linked DIME Sample ID
The fabricator/manufacturer/facility name	CCA Lakeside	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name		Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-37-0036
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	source
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

DIME Sample ID: 2022-03-01-6

DIME Test ID: 2022-03-01-6-6

Testing Lab: CT D11 - District 11 Materials Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2024-08-29

Input Type: Measured

Tester's full name: Mohammad Abbassi

Date of test: 03/04/2022

Mass of saturated surface dry sample (before pycnometer) (S): 500.0 grams

Mass of the pycnometer with water and aggregate (C): 992.1 grams

Mass of the pycnometer with water (B): 679.2 grams

Mass of the oven dried sample (before pycnometer) (A): 489.5 grams

Mass of the saturated surface dry aggregate (for absorption) (S): 500.0 grams

Mass of the oven dry aggregate (for absorption) (A): 1000.0 grams

Test Sample Preparation: Total Saturation

Bulk specific gravity: 2.616

Bulk specific gravity (SSD Basis): 2.672

Apparent specific gravity: 2.772

Absorption: 2.1 %

General comments (publicly viewable) (Max 1000 characters): Pass

Test was verified on 8/29/2024 ✔