Sample Record
Owner Lab
- CT D11 - District 11 Materials Laboratory
DIME Sample ID 2022-03-01-6
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 215257 DEA: 11056374 EFIS: 1117000087 |
|---|---|
| DIST-CO-RTE-PM | 11-SD-11-0.6/2.7 |
| Award Date | 02/16/2021 |
| Closeout Date | Not set |
| Work Description | CONSTRUCT INTERCHANGE, PLACE JPCP, HMA, AND INSTALL LIGHTING. |
| Location Description | SAN DIEGO COUNTY NEAR SAN DIEGO FROM 0.2 MILE WEST OF SANYO AVENUE UNDERCROSSING TO 1.2 MILE EAST OF ENRICO FERMI DRIVE OVERCROSSING |
| QA Service Level | 1 (Verified on 11/25/2020) |
Sample Information
| Sample Taken Date | 03/01/2022 | Sample Unique Key | 6 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 03/01/2022 |
| Sample type | Quality Assurance | A brief description of the sample | 3/4" HMA PSU |
| The quantity of what the sample constitutes | 3 bags, 12 boxes, 3 cans | From where was the sample collected | Source |
| First name of sampler or witnessed by | David | Last name of sampler or witnessed by | Walker |
| Title of sampler | Telephone number of sampler | 8582480978 | |
| Laboratory sample identification | 4136-PSU | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | CCA Lakeside | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-37-0036 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | source | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number | Not set |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
|---|---|---|---|---|---|---|---|---|
| 2022-03-01-6-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Mohammad Abbassi, CT D11 - District 11 Materials Laboratory | 03/03/2022 | Mohammad Abbassi | No | Info | ||
| 2022-03-01-6-2 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Mohammad Abbassi, CT D11 - District 11 Materials Laboratory | 03/03/2022 | Mohammad Abbassi | No | Info | ||
| 2022-03-01-6-3 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Mohammad Abbassi, CT D11 - District 11 Materials Laboratory | 03/03/2022 | Mohammad Abbassi | No | Info | ||
| 2022-03-01-6-4 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | Mohammad Abbassi, CT D11 - District 11 Materials Laboratory | 03/03/2022 | Mohammad Abbassi | No | Info | ||
| 2022-03-01-6-5 | CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index) | Mohammad Abbassi, CT D11 - District 11 Materials Laboratory | 03/03/2022 | Mohammad Abbassi | No | No plastic index | Info | |
| 2022-03-01-6-6 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Mohammad Abbassi, CT D11 - District 11 Materials Laboratory | 03/04/2022 | Mohammad Abbassi | No | Pass | Info | |
| 2022-03-01-6-7 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | Mohammad Abbassi, CT D11 - District 11 Materials Laboratory | 03/04/2022 | Mohammad Abbassi | No | Info | ||
| 2022-03-01-6-8 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Mohammad Abbassi, CT D11 - District 11 Materials Laboratory | 03/03/2022 | Mohammad Abbassi | No | Info | ||
| 2022-03-01-6-9 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | Mohammad Abbassi, CT D11 - District 11 Materials Laboratory | 03/03/2022 | Mohammad Abbassi | No | Pass | Info | |
| 2022-03-01-6-10 | AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis) | Mohammad Abbassi, CT D11 - District 11 Materials Laboratory | 03/03/2022 | Mohammad Abbassi | No | Info |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2022-03-01-6-1 AASHTO T27-14
DIME Test ID: 2022-03-01-6-2 AASHTO T335-09r13
DIME Test ID: 2022-03-01-6-3 ASTM D4791-10
DIME Test ID: 2022-03-01-6-4 AASHTO T176-08
DIME Test ID: 2022-03-01-6-5 CTM 204-June 2010
DIME Test ID: 2022-03-01-6-6 AASHTO T84-14
DIME Test ID: 2022-03-01-6-7 AASHTO T85-13
DIME Test ID: 2022-03-01-6-8 AASHTO T96-02r10
DIME Test ID: 2022-03-01-6-9 AASHTO T304-11
DIME Test ID: 2022-03-01-6-10 AASHTO T30-19