Summary for Test 2021-06-23-51-9
Test performed: AASHTO T304-11Project Information
| Project Identifiers | Project ID: 215367 DEA: 021J4904 EFIS: 0220000084 |
|---|---|
| DIST-CO-RTE-PM | 02-TEH-32-14.0/20.0 |
| Award Date | 02/02/2021 |
| Closeout Date | 04/11/2024 |
| Work Description | PLACE HOT MIX ASPHALT (TYPE A). |
| Location Description | TEHAMA COUNTY ABOUT 28 MILES EAST OF FOREST RANCH FROM 1.1 MILES EAST OF DEER CREEK BRIDGE NO. 08-0068 TO 0.4 MILE WEST OF SLATE CREEK BRIDGE NO. 08-0154 |
| QA Service Level | 1 (Verified on 12/24/2020) |
Sample Information
| Sample Taken Date | 06/23/2021 | Sample Unique Key | 51 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/24/2021 |
| Sample type | Verification | A brief description of the sample | Combined Untreated Virgin Aggregate for use in 3/8-inch Type A HMA |
| The quantity of what the sample constitutes | JMF Verification | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Derek | Last name of sampler or witnessed by | Serna |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | D78856F | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Sierra Cascade Aggregate and Asphalt Products | Transportation Laboratory (TL) Number | 896901 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-32-0002::Chester Pit 1 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Laboratory Batched from Sized Untreated Virgin Stockpile Samples | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/8 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2021-06-23-51
DIME Test ID: 2021-06-23-51-9
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)
Test Release Date: 2022-02-01
Test Results
What test method is performed?: Method A
Input Type: Measured
Tester's full name: Terry McCormick
Date of test: 07/27/2021
Mass of measure: 190.2 grams
Bulk dry specific gravity: 2.457
Mass of sample and measure #1: 325.9 grams
Mass of sample and measure #2: 326.0 grams
Volume of cylinder: 100.0 mL
Mass of sample #1: 135.7 grams
Mass of sample #2: 135.8 grams
Uncompacted voids #1: 44.8 %
Uncompacted voids #2: 44.7 %
Average uncompacted voids: 44.8 %
General comments (publicly viewable) (Max 1000 characters): The fine bulk specific gravity (AASHTO T 84) was determined on unwashed material.
Test was verified on 2/1/2022 ✔