Sample Record

Owner Lab

  • CT D02 - Redding Northern Regional Laboratory

DIME Sample ID 2021-06-23-51

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 215367
DEA: 021J4904
EFIS: 0220000084
DIST-CO-RTE-PM02-TEH-32-14.0/20.0
Award Date02/02/2021
Closeout Date04/11/2024
Work DescriptionPLACE HOT MIX ASPHALT (TYPE A).
Location DescriptionTEHAMA COUNTY ABOUT 28 MILES EAST OF FOREST RANCH FROM 1.1 MILES EAST OF DEER CREEK BRIDGE NO. 08-0068 TO 0.4 MILE WEST OF SLATE CREEK BRIDGE NO. 08-0154
QA Service Level1 (Verified on 12/24/2020)

Sample Information

Sample Taken Date06/23/2021 Sample Unique Key51
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing06/24/2021
Sample typeVerification A brief description of the sampleCombined Untreated Virgin Aggregate for use in 3/8-inch Type A HMA
The quantity of what the sample constitutesJMF Verification From where was the sample collectedManufacturer
First name of sampler or witnessed byDerek Last name of sampler or witnessed bySerna
Title of sampler Telephone number of sampler
Laboratory sample identificationD78856F Linked DIME Sample ID
The fabricator/manufacturer/facility nameSierra Cascade Aggregate and Asphalt Products Transportation Laboratory (TL) Number896901
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-32-0002::Chester Pit 1
The fabricator's/manufacturer's product name for the sample The fabricator/manufacturer designation for the sample
The plant number A detailed description of where the material sample was collectedLaboratory Batched from Sized Untreated Virgin Stockpile Samples
Where the material sample would have been placed if not sampled Primary Aggregate Nominal Size3/8 inch
The concrete mix design number Lot number
Sublot number Aggregate Mix NumberNot set

JMF Information

Verification IDJMF3513-2022-1 Date Created02/01/2022
JMF Submittal IDJMF3511-22-2022-1 JMF StatusSubmittal Rejected For Use
Producer Mix IDL200669 Rejected Date08/19/2024

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2021-06-23-51-1AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)Darrell Valasek, CT D02 - Redding Northern Regional Laboratory07/15/2021Ward Jenkins
Yes
02/01/2022
2021-06-23-51-2CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index)Terry McCormick, CT D02 - Redding Northern Regional Laboratory07/19/2021Ward Jenkins
Yes
02/01/2022
2021-06-23-51-3AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)Colt Sweeny, CT D02 - Redding Northern Regional Laboratory07/27/2021Ward Jenkins
Yes
02/01/2022
2021-06-23-51-4AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)Colt Sweeny, CT D02 - Redding Northern Regional Laboratory07/19/2021Ward Jenkins
Yes
02/01/2022
2021-06-23-51-5AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)Dennis Hickey, CT D02 - Redding Northern Regional Laboratory07/20/2021Ward Jenkins
Yes
02/01/2022Unwashed—Approximately 10.6% of the specimen was passing No. 200 material
2021-06-23-51-6AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)Dennis Hickey, CT D02 - Redding Northern Regional Laboratory07/20/2021Ward Jenkins
Yes
02/01/2022
2021-06-23-51-7AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)Darrell Valasek, CT D02 - Redding Northern Regional Laboratory07/26/2021Ward Jenkins
Yes
02/01/2022
2021-06-23-51-8AASHTO T210-15: Standard Method of Test for Aggregate Durability Index (Durability Index)K.Rios Dorado and T.McCormick, CT D02 - Redding Northern Regional Laboratory07/29/2021Ward Jenkins
Yes
02/01/2022
2021-06-23-51-9AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)Terry McCormick, CT D02 - Redding Northern Regional Laboratory07/27/2021Ward Jenkins
Yes
02/01/2022The fine bulk specific gravity (AASHTO T 84) was determined on unwashed material.
2021-06-23-51-10ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)Dennis Hickey, CT D02 - Redding Northern Regional Laboratory07/20/2021Ward Jenkins
Yes
02/01/2022

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2021-06-23-51-1 AASHTO T27-14 (Verified)
DIME Test ID: 2021-06-23-51-2 CTM 204-June 2010 (Verified)
DIME Test ID: 2021-06-23-51-3 AASHTO T335-09r13 (Verified)
DIME Test ID: 2021-06-23-51-4 AASHTO T85-13 (Verified)
DIME Test ID: 2021-06-23-51-5 AASHTO T84-14 (Verified)
DIME Test ID: 2021-06-23-51-6 AASHTO T96-02r10 (Verified)
DIME Test ID: 2021-06-23-51-7 AASHTO T176-08 (Verified)
DIME Test ID: 2021-06-23-51-8 AASHTO T210-15 (Verified)
DIME Test ID: 2021-06-23-51-9 AASHTO T304-11 (Verified)
DIME Test ID: 2021-06-23-51-10 ASTM D4791-10 (Verified)