Summary for Test 2022-01-10-26-3
Test performed: CTM 217-June 2011Project Information
| Project Identifiers | Project ID: 214993 DEA: 051F5004 EFIS: 0514000003 |
|---|---|
| DIST-CO-RTE-PM | 05-SB-101,135-70.6/71.2;0.1 |
| Award Date | 11/17/2020 |
| Closeout Date | 01/11/2024 |
| Work Description | CONSTRUCT CONCRETE BRIDGE, BRIDGE REMOVAL, COLD PLANE, PLACE HMA. |
| Location Description | SANTA BARBARA COUNTY AT LOS ALAMOS ON ROUTE 101 FROM 0.3 MILE SOUTH TO 0.3 MILE NORTH OF ROUTE 101/135 SEPARATION AND ON ROUTE 135 AT ROUTE 101/135 SEPARATION |
| QA Service Level | 1 (Verified on 09/03/2020) |
Sample Information
| Sample Taken Date | 01/10/2022 | Sample Unique Key | 26 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 01/10/2022 |
| Sample type | Department Acceptance | A brief description of the sample | 3/4" Class 2 AB |
| The quantity of what the sample constitutes | 1 days placement | From where was the sample collected | Source |
| First name of sampler or witnessed by | Salvador | Last name of sampler or witnessed by | Lopez-Zamora |
| Title of sampler | ARET | Telephone number of sampler | 8057483854 |
| Laboratory sample identification | 334 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Calportland-Garey | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-42-0014 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | Class 2 aggregate base | The fabricator/manufacturer designation for the sample | |
| The plant number | A detailed description of where the material sample was collected | 300 LFT approach and departure center median. | |
| Where the material sample would have been placed if not sampled | center median | Primary Aggregate Nominal Size | 3/4 inch |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2022-01-10-26
DIME Test ID: 2022-01-10-26-3
Testing Lab: CT D05 - Santa Maria Field Laboratory
Test Method: CTM 217-June 2011: Method of Test for Sand Equivalent
Test Release Date: 2022-01-25
Test Results
Number of tests: 3
Input Type: Measured
Tester's full name: Salvador Lopez-Zamora
Date of test: 01/10/2022
Temperature correction: 0
Temperature of solution: 70
Clay reading (test 1): 6.8
Sand reading (test 1): 3.5
Clay reading (test 2): 7.4
Sand reading (test 2): 3.6
Clay reading (test 3): 7
Sand reading (test 3): 3.3
Sand equivalent (test 1): 52
Sand equivalent (test 2): 49
Sand equivalent (test 3): 48
Sand equivalent before temperature correction: 50
Sand equivalent after temperature correction: 50
General comments (publicly viewable) (Max 1000 characters): Sample complies.
Test was verified on 1/25/2022 ✔