Summary for Test 2021-12-20-28-1
Test performed: ASTM C39-21Project Information
| Project Identifiers | Project ID: 215109 DEA: 081C8504 EFIS: 0813000047 |
|---|---|
| DIST-CO-RTE-PM | 08-RIV-74-0.0/5.8 |
| Award Date | 11/12/2020 |
| Closeout Date | 06/02/2025 |
| Work Description | ROADWAY EXCAVATION, HOT MIX ASPHALT, AND STRUCTURAL SHOTCRETE WALLS. |
| Location Description | RIVERSIDE COUNTY NEAR LAKE ELSINORE FROM ORANGE COUNTY LINE TO MONTE VISTA STREET |
| QA Service Level | 1 (Verified on 02/24/2021) |
Sample Information
| Sample Taken Date | 12/20/2021 | Sample Unique Key | 28 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 12/21/2021 | Sample type | Quality Control |
| A brief description of the sample | 6"x12" concrete samples | The quantity of what the sample constitutes | 4 cylinders |
| From where was the sample collected | Fabricator | First name of sampler or witnessed by | Ray |
| Last name of sampler or witnessed by | Cuevas | Title of sampler | QC Manager |
| Telephone number of sampler | 19094294133 | Laboratory sample identification | Jensen Lab |
| Linked DIME Sample ID | 122021 | The fabricator/manufacturer/facility name | Jensen Precast |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | 08-1C8504 33 Riv | Structure name | RTA Ortega Highway |
| Bid Item | Not set |
Material Information
| Material Type | Concrete | The concrete mix design number | 10 |
|---|---|---|---|
| The truck number from where the sample was collected | The batch plant ticket number from where the sample was collected | 54423 | |
| Concrete batch plant | The fabricator/manufacturer designation for the sample | ||
| A detailed description of where the material sample was collected | Conveyor belt | Where the material sample would have been placed if not sampled | |
| From Lot No. | Bag Lot No. |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2021-12-20-28
DIME Test ID: 2021-12-20-28-1
Testing Lab: Jensen Precast - Fontana
Test Method: ASTM C39-21: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Test Release Date: 2022-01-17
Test Results
Unit system used?: US Units
Number of specimens: 4
Test performed: With no density determined
Input Type: Calculated
Tester's full name: Ray Cuevas
Date of test: 12/20/2021
Capped in accordance with?: no data
Apparent mass of submerged cylinder 1: 30 lb
Average diameter of cylinder 1: 6.00 in
Average diameter of cylinder 2: 6.00 in
Average diameter of cylinder 3: 6.00 in
Average diameter of cylinder 4: 6.00 in
Maximum load on cylinder 1: 160700 lb
Maximum load on cylinder 2: 166460 lb
Maximum load on cylinder 3: 173630 lb
Maximum load on cylinder 4: 175112 lb
Type of fracture pattern of cylinder 1: 2
Type of fracture pattern of cylinder 2: 2
Type of fracture pattern of cylinder 3: 2
Type of fracture pattern of cylinder 4: 3
Comment on any defect in either specimen or caps (Max 250 Characters): no data
Correction factor for cylinder 1: 1.00
Correction factor for cylinder 2: 1.00
Correction factor for cylinder 3: 1.00
Correction factor for cylinder 4: 1.00
Age of specimen: 7 days
Age of specimen in hours: 168 hours
Cross sectional area of cylinder 1: 28.275 in^2
Cross sectional area of cylinder 2: 28.275 in^2
Cross sectional area of cylinder 3: 28.275 in^2
Cross sectional area of cylinder 4: 28.275 in^2
Compressive strength (to nearest 10 psi): 6000 psi
Serial number of delivery ticket, if available: no data
General comments (publicly viewable) (Max 1000 characters): First two cylinders tested at 7 days, last two cylinders tested at 28 days with an average of 6,171 psi
Test was verified on 1/17/2022 ✔