Summary for Test 2021-12-20-6-7
Test performed: AASHTO T84-14Project Information
| Project Identifiers | Project ID: 211848 DEA: 112T2174 EFIS: 1116000131 |
|---|---|
| DIST-CO-RTE-PM | 11-SD-5-R37.4 - R46.5 |
| Award Date | 12/22/2016 |
| Closeout Date | Not set |
| Work Description | (Alternative Delivery) CMGC, San Elijo Highway Bridge Replacement. Replace the San Elijo lagoon highway bridge, construct HOV lanes, construct bike and pedestrian trails and bridge, build multi-use facility at Manchester Ave. |
| Location Description | IN SAN DIEGO COUNTY IN SOLANA BEACH AND ENCINITAS FROM 0.1 MILE NORTH OF LOMAS SANTA FE DRIVE OVERCROSSING TO 0.2 MILE SOUTH OF BIRMINGHAM DRIVE OVERCROSSING |
| QA Service Level | 1 (Verified on 01/31/2017) |
Sample Information
| Sample Taken Date | 12/20/2021 | Sample Unique Key | 6 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 12/20/2021 |
| Sample type | Quality Assurance | A brief description of the sample | 3/4" HMA PSU |
| The quantity of what the sample constitutes | 3 bags, 12 boxes, 3 cans | From where was the sample collected | Supplier |
| First name of sampler or witnessed by | David | Last name of sampler or witnessed by | Walker |
| Title of sampler | NOT PROVIDED | Telephone number of sampler | 8582480978 |
| Laboratory sample identification | 1307-PSU | Linked DIME Sample ID | 2021-12-20-5 |
| The fabricator/manufacturer/facility name | CCA Lakeside | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | Hanson Vigilante Rd. |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | HMA Plant | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
| The concrete mix design number | 23417163 | Lot number | |
| Sublot number | Aggregate Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2021-12-20-6
DIME Test ID: 2021-12-20-6-7
Testing Lab: CT D11 - District 11 Materials Laboratory
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Test Release Date: 2021-12-24
Test Results
Input Type: Measured
Tester's full name: Daniel Smith
Date of test: 12/23/2021
Mass of saturated surface dry sample (before pycnometer) (S): 504.3 grams
Mass of the pycnometer with water and aggregate (C): 990.0 grams
Mass of the pycnometer with water (B): 679.2 grams
Mass of the oven dried sample (before pycnometer) (A): 495.1 grams
Mass of the saturated surface dry aggregate (for absorption) (S): 1.9 grams
Mass of the oven dry aggregate (for absorption) (A): 495.1 grams
Test Sample Preparation: 6% Moisture
Bulk specific gravity: 2.559
Bulk specific gravity (SSD Basis): 2.606
Apparent specific gravity: 2.686
Absorption: 1.9 %
General comments (publicly viewable) (Max 1000 characters): Pass
Test was verified on 12/24/2021 ✔