Sample Record

Owner Lab

  • CT D11 - District 11 Materials Laboratory

DIME Sample ID 2021-12-20-6

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 211848
DEA: 112T2174
EFIS: 1116000131
DIST-CO-RTE-PM11-SD-5-R37.4 - R46.5
Award Date12/22/2016
Closeout DateNot set
Work Description(Alternative Delivery) CMGC, San Elijo Highway Bridge Replacement. Replace the San Elijo lagoon highway bridge, construct HOV lanes, construct bike and pedestrian trails and bridge, build multi-use facility at Manchester Ave.
Location DescriptionIN SAN DIEGO COUNTY IN SOLANA BEACH AND ENCINITAS FROM 0.1 MILE NORTH OF LOMAS SANTA FE DRIVE OVERCROSSING TO 0.2 MILE SOUTH OF BIRMINGHAM DRIVE OVERCROSSING
QA Service Level1 (Verified on 01/31/2017)

Sample Information

Sample Taken Date12/20/2021 Sample Unique Key6
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing12/20/2021
Sample typeQuality Assurance A brief description of the sample3/4" HMA PSU
The quantity of what the sample constitutes3 bags, 12 boxes, 3 cans From where was the sample collectedSupplier
First name of sampler or witnessed byDavid Last name of sampler or witnessed byWalker
Title of samplerNOT PROVIDED Telephone number of sampler8582480978
Laboratory sample identification1307-PSU Linked DIME Sample ID2021-12-20-5
The fabricator/manufacturer/facility nameCCA Lakeside Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)Hanson Vigilante Rd.
The fabricator's/manufacturer's product name for the sample The fabricator/manufacturer designation for the sample
The plant number A detailed description of where the material sample was collectedHMA Plant
Where the material sample would have been placed if not sampled Primary Aggregate Nominal Size3/4 inch
The concrete mix design number23417163 Lot number
Sublot number Aggregate Mix NumberNot set

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2021-12-20-6-1AASHTO T11-5: Standard Method of Test for Materials Finer Than 75-μm (No. 200) Sieve in Mineral Aggregates by WashingMohammad Abbassi, CT D11 - District 11 Materials Laboratory12/23/2021Mohammad Abbassi
Yes
12/24/2021-
2021-12-20-6-2AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)Mohammad Abbassi, CT D11 - District 11 Materials Laboratory12/23/2021Mohammad Abbassi
Yes
12/24/2021Pass
2021-12-20-6-4AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)Mohammad Abbassi, CT D11 - District 11 Materials Laboratory12/23/2021Mohammad Abbassi
Yes
12/24/2021 -
2021-12-20-6-5THIS TEST HAS BEEN SUPERSEDED.
AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)
Daniel Smith, CT D11 - District 11 Materials Laboratory12/23/2021Daniel Smith
Yes
12/24/2021THIS TEST HAS BEEN SUPERSEDED.
2021-12-20-6-6AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)Daniel Smith, CT D11 - District 11 Materials Laboratory12/23/2021Daniel Smith
Yes
12/24/2021Pass
2021-12-20-6-7AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)Daniel Smith, CT D11 - District 11 Materials Laboratory12/23/2021Daniel Smith
Yes
12/24/2021Pass
2021-12-20-6-8AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)Mohammad Abbassi, CT D11 - District 11 Materials Laboratory12/23/2021Mohammad Abbassi
Yes
12/24/2021 -
2021-12-20-6-9AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)Mohammad Abbassi, CT D11 - District 11 Materials Laboratory12/23/2021Mohammad Abbassi
Yes
12/24/2021Pass
2021-12-20-6-10ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)Daniel Smith, CT D11 - District 11 Materials Laboratory12/23/2021Daniel Smith
Yes
12/24/2021Pass
2021-12-20-6-11CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index)Daniel Smith, CT D11 - District 11 Materials Laboratory12/23/2021Daniel Smith
Yes
12/24/2021Material was non plastic

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2021-12-20-6-1 AASHTO T11-5 (Verified)
DIME Test ID: 2021-12-20-6-2 AASHTO T176-08 (Verified)
DIME Test ID: 2021-12-20-6-4 AASHTO T30-19 (Verified)
DIME Test ID: 2021-12-20-6-5 AASHTO T304-11 (Verified)
DIME Test ID: 2021-12-20-6-6 AASHTO T335-09r13 (Verified)
DIME Test ID: 2021-12-20-6-7 AASHTO T84-14 (Verified)
DIME Test ID: 2021-12-20-6-8 AASHTO T85-13 (Verified)
DIME Test ID: 2021-12-20-6-9 AASHTO T96-02r10 (Verified)
DIME Test ID: 2021-12-20-6-10 ASTM D4791-10 (Verified)
DIME Test ID: 2021-12-20-6-11 CTM 204-June 2010 (Verified)
DIME Test ID: 2021-12-20-6-12 AASHTO T27-14 (Verified)