DIME - Test Summary

Summary for Test 2021-10-20-22-2

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 215148 DEA: 081E8404 EFIS: 0814000113
DIST-CO-RTE-PM	08-RIV,SBD-62-R6.7/9.2,0.0/15.1,29.3/33.6
Award Date	12/11/2020
Closeout Date	03/01/2023
Work Description	REPLACE ROADWAY WITH RHMA-G AND HMA.
Location Description	IN RIVERSIDE AND SAN BERNARDINO COUNTIES IN AND NEAR YUCCA VALLEY AND IN TWENTYNINE PALMS FROM 0.2 MILE NORTH OF INDIAN CANYON DRIVE TO 0.6 MILE WEST OF UTAH TRAIL
QA Service Level	1 (Verified on 03/18/2021)

Sample Taken Date	10/20/2021	Sample Unique Key	22
Date that the sample was received by the laboratory/organization performing the testing	10/21/2021	Sample type	Verification
A brief description of the sample	PSUE 3/4" RHMA-G-SP 0.5% LAS	The quantity of what the sample constitutes	4 Bags of Aggregate
From where was the sample collected	Manufacturer	First name of sampler or witnessed by	Matich Cabazon
Last name of sampler or witnessed by	QC	Title of sampler
Telephone number of sampler		Laboratory sample identification	0599G-21
Linked DIME Sample ID		The fabricator/manufacturer/facility name	Matich Cabazon
Transportation Laboratory (TL) Number		Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier		Structure name
Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-36-0040, 91-33-0008
The fabricator's/manufacturer's product name for the sample	3/4 RHMA-G-SP	The fabricator/manufacturer designation for the sample
The plant number	CHP 68E	A detailed description of where the material sample was collected	Belt Cut at Matich Cabazon Plant
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

DIME Sample ID: 2021-10-20-22

DIME Test ID: 2021-10-20-22-2

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2021-10-27

Input Type: Measured

Tester's full name: Friday Ofoegbu

Date of test: 10/26/2021

Mass of saturated surface dry sample (before pycnometer) (S)	500.0 grams
Mass of the pycnometer with water and aggregate (C)	987.6 grams
Mass of the pycnometer with water (B)	674.7 grams
Mass of the oven dried sample (before pycnometer) (A)	493.8 grams
Mass of the saturated surface dry aggregate (for absorption) (S)	500.0 grams
Mass of the oven dry aggregate (for absorption) (A)	493.8 grams
Test Sample Preparation	6% Moisture
Bulk specific gravity	2.639
Bulk specific gravity (SSD Basis)	2.672
Apparent specific gravity	2.730
Absorption	1.3 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 10/27/2021 ✔