Sample Record

Owner Lab

  • CT D08 - Fontana Southern Regional Laboratory

DIME Sample ID 2021-10-20-22

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 215148
DEA: 081E8404
EFIS: 0814000113
DIST-CO-RTE-PM08-RIV,SBD-62-R6.7/9.2,0.0/15.1,29.3/33.6
Award Date12/11/2020
Closeout Date03/01/2023
Work DescriptionREPLACE ROADWAY WITH RHMA-G AND HMA.
Location DescriptionIN RIVERSIDE AND SAN BERNARDINO COUNTIES IN AND NEAR YUCCA VALLEY AND IN TWENTYNINE PALMS FROM 0.2 MILE NORTH OF INDIAN CANYON DRIVE TO 0.6 MILE WEST OF UTAH TRAIL
QA Service Level1 (Verified on 03/18/2021)

Sample Information

Sample Taken Date10/20/2021 Sample Unique Key22
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing10/21/2021
Sample typeVerification A brief description of the samplePSUE 3/4" RHMA-G-SP 0.5% LAS
The quantity of what the sample constitutes4 Bags of Aggregate From where was the sample collectedManufacturer
First name of sampler or witnessed byMatich Cabazon Last name of sampler or witnessed byQC
Title of sampler Telephone number of sampler
Laboratory sample identification0599G-21 Linked DIME Sample ID
The fabricator/manufacturer/facility nameMatich Cabazon Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-36-0040, 91-33-0008
The fabricator's/manufacturer's product name for the sample3/4 RHMA-G-SP The fabricator/manufacturer designation for the sample
The plant numberCHP 68E A detailed description of where the material sample was collectedBelt Cut at Matich Cabazon Plant
Where the material sample would have been placed if not sampledAsphalt Paving Primary Aggregate Nominal Size3/4 inch
The concrete mix design number Lot number
Sublot number Aggregate Mix NumberNot set

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2021-10-20-22-1AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)Larry Diaz, Michael Magana, CT D08 - Fontana Southern Regional Laboratory10/22/2021Michael Magana
Yes
10/27/2021Combined Virgin Aggregate Gradation
2021-10-20-22-2AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)Friday Ofoegbu, CT D08 - Fontana Southern Regional Laboratory10/26/2021Michael Magana
Yes
10/27/2021
2021-10-20-22-3AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)Larry Diaz, CT D08 - Fontana Southern Regional Laboratory10/23/2021Michael Magana
Yes
10/27/2021
2021-10-20-22-4AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)David Padilla, CT D08 - Fontana Southern Regional Laboratory10/23/2021Michael Magana
Yes
10/27/2021
2021-10-20-22-5AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)Larry Diaz, CT D08 - Fontana Southern Regional Laboratory10/22/2021Michael Magana
Yes
10/27/2021
2021-10-20-22-6AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)Michael Magana, CT D08 - Fontana Southern Regional Laboratory10/26/2021Michael Magana
Yes
10/27/2021
2021-10-20-22-7AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)Michael Magana, CT D08 - Fontana Southern Regional Laboratory10/26/2021Michael Magana
Yes
10/27/2021
2021-10-20-22-8ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)Michael Magana, CT D08 - Fontana Southern Regional Laboratory10/26/2021Michael Magana
Yes
10/27/2021

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2021-10-20-22-1 AASHTO T27-14 (Verified)
DIME Test ID: 2021-10-20-22-2 AASHTO T84-14 (Verified)
DIME Test ID: 2021-10-20-22-3 AASHTO T85-13 (Verified)
DIME Test ID: 2021-10-20-22-4 AASHTO T96-02r10 (Verified)
DIME Test ID: 2021-10-20-22-5 AASHTO T176-08 (Verified)
DIME Test ID: 2021-10-20-22-6 AASHTO T304-11 (Verified)
DIME Test ID: 2021-10-20-22-7 AASHTO T335-09r13 (Verified)
DIME Test ID: 2021-10-20-22-8 ASTM D4791-10 (Verified)