Summary for Test 2021-10-06-5-1
Test performed: ASTM F606-14Project Information
| Project Identifiers | Project ID: 213568 DEA: 034H6904 EFIS: 0319000026 |
|---|---|
| DIST-CO-RTE-PM | 03-SAC,SAC/SOL-12-0-0.4/26.3-26.4, 0.0-0.4/26.3-26.4 |
| Award Date | 08/13/2018 |
| Closeout Date | 08/28/2023 |
| Work Description | Major Damage Restoration (Emergency Opening) |
| Location Description | Not set |
| QA Service Level | 1 (Verified on 08/24/2018) |
Sample Information
| Sample Taken Date | 10/06/2021 | Sample Unique Key | 5 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 10/12/2021 | Sample type | Quality Assurance |
| A brief description of the sample | 1" x 7" HDG with 3" thread one end | The quantity of what the sample constitutes | 1" F1554 anchor bolt assembly |
| From where was the sample collected | Fabricator | First name of sampler or witnessed by | Greg |
| Last name of sampler or witnessed by | Thompson | Title of sampler | Associate Steel Inspector |
| Telephone number of sampler | 510-376-7155 cell | Laboratory sample identification | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | CK Johnson Industries | |
| Transportation Laboratory (TL) Number | c658234 | Inspector Lot Number from the Transportation Laboratory (TL) Form | B9-086-21 |
| Structure unique identifier | Structure name | Rio Vista | |
| Bid Item | Not set |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | none- anchor bolts |
|---|---|---|---|
| Heat Number(s) | Bolt- 62150547 nut- 201945 Washer- 12108760 | Nut Mfg. Lot Number(s) | 34216-201945 |
| Washer Mfg. Lot Number(s) | 0521-812 | Bolt Specification | F1554 |
| Bolt Length(s) | 7" | Nut Specification | A563 gr DH |
| Washer Specification | F436 type 1 | Finish | HDG |
| Diameter/Size | 1" | Bolt Mfg. Lot Number | portland bolt- 62150547 |
| Rocap Test Requirement(s) | no | Lubricant Requirements(s) | yes |
| Washer Inner Diameter(s) | Bolt Mill Supplier | Not set | |
| Nut Mill Supplier | Not set | Washer Mill Supplier | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2021-10-06-5
DIME Test ID: 2021-10-06-5-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)
Test Release Date: 2021-10-28
Test Results
Number of Samples: 1
Input Type: Measured
Tester's full name: fsaylor
Date of test: 10/26/2021
UTM: 400kip
Temperature: 72
| Num | Sample | Size | Area (in^2) | Peak Load (lbf) | Peak Load (kN) | Tensile Strength (psi) | Stress at Offset (psi) | Load at Offset (lbf) | Comments |
|---|---|---|---|---|---|---|---|---|---|
| 1 | 1 | UNC 1 | 0.606 | 53593 | 238 | 88438 | 72576 | 43981 | Headed F1554 10 Dea. |
General comments (publicly viewable) (Max 1000 characters): Headed F1554 10 Dea.
Test Graph
Source: Bluehill Data Point FileTest was verified on 10/28/2021 ✔