Owner Lab
- CT HQ - Sacramento Structural Materials Testing Laboratory
DIME Sample ID 2021-10-06-5
Sample is locked from editing. info
Project Information
| Project Identifiers | Project ID: 213568
DEA: 034H6904
EFIS: 03190000026 |
|---|
| DIST-CO-RTE-PM | 03-SAC,SAC/SOL-12-0-0.4/
26.3-26.4, 0.0-0.4/26.3-26.4 |
|---|
| Award Date | Not set |
|---|
| Closeout Date | Not set |
|---|
| Work Description | Major Damage Restoration (Emergency Opening) |
|---|
| Location Description | Not set |
|---|
| QA Service Level | 1 (Verified on 08/24/2018) |
|---|
Sample Information
| Sample Taken Date | 10/06/2021 |
Sample Unique Key | 5 |
|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 10/12/2021 |
|---|
| Sample type | Quality Assurance |
A brief description of the sample | 1" x 7" HDG with 3" thread one end |
|---|
| The quantity of what the sample constitutes | 1" F1554 anchor bolt assembly |
From where was the sample collected | Fabricator |
|---|
| First name of sampler or witnessed by | Greg |
Last name of sampler or witnessed by | Thompson |
|---|
| Title of sampler | Associate Steel Inspector |
Telephone number of sampler | 510-376-7155 cell |
|---|
| Laboratory sample identification | |
Linked DIME Sample ID | |
|---|
| The fabricator/manufacturer/facility name | CK Johnson Industries |
Transportation Laboratory (TL) Number | c658234 |
|---|
| Inspector Lot Number from the Transportation Laboratory (TL) Form | B9-086-21 |
Structure unique identifier | |
|---|
| Structure name | Rio Vista |
|---|
Material Information
| Material Type | SMTL TM3 - Fastener Assembly |
Rocap Number(s) | none- anchor bolts |
|---|
| Heat Number(s) | Bolt- 62150547
nut- 201945
Washer- 12108760 |
Nut Mfg. Lot Number(s) | 34216-201945 |
|---|
| Washer Mfg. Lot Number(s) | 0521-812 |
Bolt Specification | F1554 |
|---|
| Bolt Length(s) | 7" |
Nut Specification | A563 gr DH |
|---|
| Washer Specification | F436 type 1 |
Finish | HDG |
|---|
| Diameter/Size | 1" |
Bolt Mfg. Lot Number | portland bolt- 62150547 |
|---|
| Rocap Test Requirement(s) | no |
Lubricant Requirements(s) | yes |
|---|
Submitted Tests
| DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
| 2021-10-06-5-1 | ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws) | fsaylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 10/26/2021 | fsaylor | Yes | 10/28/2021 | Headed F1554 10 Dea. |
|
| 2021-10-06-5-2 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load) | fsaylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 10/26/2021 | fsaylor | Yes | 10/28/2021 | A536 |
|
| 2021-10-06-5-3 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 10/26/2021 | Fred Saylor | Yes | 10/28/2021 | |
|
| 2021-10-06-5-4 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 10/26/2021 | Fred Saylor | Yes | 10/28/2021 | |
|
| 2021-10-06-5-5 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 10/26/2021 | Fred Saylor | Yes | 10/28/2021 | |
|
| 2021-10-06-5-6 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 10/26/2021 | Fred Saylor | Yes | 10/28/2021 | |
|
| 2021-10-06-5-7 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 10/26/2021 | Fred Saylor | Yes | 10/28/2021 | |
|
| 2021-10-06-5-8 | ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 10/26/2021 | Fred Saylor | Yes | 10/28/2021 | |
|
136382136390136395136396136397136398136399136400
