Summary for Test 2021-04-23-25-3

Test performed: AASHTO T209-12

Project Information

Project IdentifiersProject ID: 215251
DEA: 021J4604
EFIS: 0220000081
DIST-CO-RTE-PM02-SIS-96-34.5/38.8,88.0/92.0
Award Date02/02/2021
Closeout Date09/27/2021
Work DescriptionHMA OVERLAY, REPLACE AC SURFACING, SHOULDER BACKING & TRAFFIC STRIPE.
Location DescriptionSISKIYOU COUNTY NEAR HAPPY CAMP FROM 0.1 MILE EAST OF OAK FLAT CREEK BRIDGE TO 0.1 MILE EAST OF BENJAMIN CREEK ROAD AND FROM 0.3 MILE WEST OF BEAVER CREEK BRIDGE TO 1.0 MILE WEST OF LUMGREY CREEK BRIDGE
QA Service Level1 (Verified on 10/30/2020)

Sample Information

Sample Taken Date04/23/2021 Sample Unique Key25
Date that the sample was received by the laboratory/organization performing the testing04/23/2021 Sample typeVerification
A brief description of the sampleCombined RAP (1/2-inch) The quantity of what the sample constitutesJMF Verification
From where was the sample collectedSource First name of sampler or witnessed byDevin
Last name of sampler or witnessed byOwens Title of samplerPEI
Telephone number of sampler Laboratory sample identificationD78784B
Linked DIME Sample ID The fabricator/manufacturer/facility nameNorthstate Asphalt - Redding, CA
Transportation Laboratory (TL) Number897290 Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier Structure name
Bid ItemNot set

Material Information

Material TypeReclaimed Asphalt Pavement RAP SourceNorthstate Asphalt, Redding, CA
Aggregate Size1/2-inch Aggregate Source
RAP Stockpile Stockpile Size (tons)
Reclaimed Asphalt Pavement Mix NumberNot set

Test Details

DIME Sample ID: 2021-04-23-25
DIME Test ID: 2021-04-23-25-3
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Test Release Date: 2021-06-24

Test Results


Number of tests: 1
What is the unit of measurement for theoretical density?: US Units
Mass Determination: Air
Input Type: Measured
Tester's full name: Dennis Hickey
Date of test: 04/27/2021
Method Performed: Mechanical Agitation - Method A
Mass of container filled with water: 7336.6 grams
Mass of oven-dry sample in air for Sample 1: 1676 grams
Mass of container filled with the sample and water for Sample 1: 8353.8 grams
Temperature of Water: 76 °F
Specific Gravity for Sample 1: 2.544
Theoretical maximum density at 25°C (77°F): no data
General comments (publicly viewable) (Max 1000 characters):

Test was verified on 6/24/2021 ✔