Sample Record

Owner Lab

  • CT D02 - Redding Northern Regional Laboratory

DIME Sample ID 2021-04-23-25

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 215251
DEA: 021J4604
EFIS: 0220000081
DIST-CO-RTE-PM02-SIS-96-34.5/38.8,88.0/92.0
Award Date02/02/2021
Closeout Date09/27/2021
Work DescriptionHMA OVERLAY, REPLACE AC SURFACING, SHOULDER BACKING & TRAFFIC STRIPE.
Location DescriptionSISKIYOU COUNTY NEAR HAPPY CAMP FROM 0.1 MILE EAST OF OAK FLAT CREEK BRIDGE TO 0.1 MILE EAST OF BENJAMIN CREEK ROAD AND FROM 0.3 MILE WEST OF BEAVER CREEK BRIDGE TO 1.0 MILE WEST OF LUMGREY CREEK BRIDGE
QA Service Level1 (Verified on 10/30/2020)

Sample Information

Sample Taken Date04/23/2021 Sample Unique Key25
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing04/23/2021
Sample typeVerification A brief description of the sampleCombined RAP (1/2-inch)
The quantity of what the sample constitutesJMF Verification From where was the sample collectedSource
First name of sampler or witnessed byDevin Last name of sampler or witnessed byOwens
Title of samplerPEI Telephone number of sampler
Laboratory sample identificationD78784B Linked DIME Sample ID
The fabricator/manufacturer/facility nameNorthstate Asphalt - Redding, CA Transportation Laboratory (TL) Number897290
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeReclaimed Asphalt Pavement RAP SourceNorthstate Asphalt, Redding, CA
Aggregate Size1/2-inch Aggregate Source
RAP Stockpile Stockpile Size (tons)
Reclaimed Asphalt Pavement Mix NumberNot set

JMF Information

Verification IDJMF3513-2021-61 Date Created06/18/2021
JMF Submittal IDJMF3511-22-2021-78 JMF StatusSubmittal Authorized For Use
Producer Mix IDL210154 Authorized Date07/06/2021

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2021-04-23-25-1AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Terry McCormick, CT D02 - Redding Northern Regional Laboratory04/27/2021Ward Jenkins
Yes
06/24/2021
2021-04-23-25-2AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)Terry McCormick, CT D02 - Redding Northern Regional Laboratory04/27/2021Ward Jenkins
Yes
06/24/2021
2021-04-23-25-3AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Dennis Hickey, CT D02 - Redding Northern Regional Laboratory04/27/2021Ward Jenkins
Yes
06/24/2021

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2021-04-23-25-1 AASHTO T308-10 (Verified)
DIME Test ID: 2021-04-23-25-2 AASHTO T30-19 (Verified)
DIME Test ID: 2021-04-23-25-3 AASHTO T209-12 (Verified)