Summary for Test 2021-05-04-14-4
Test performed: AASHTO T84-14
Warning: The test results shown on this page have been superseded and are invalid.
This information is for reference only.
Project Information
Project Identifiers | Project ID: 213603 DEA: 07301504 EFIS: 0714000020 |
---|---|
DIST-CO-RTE-PM | 07-LA-1,10-R34.6/35.2,R2.1/18.4 |
Award Date | 11/19/2018 |
Closeout Date | 01/18/2022 |
Work Description | REPLACING CONCRETE AND AC PAVEMENT |
Location Description | LOS ANGELES COUNTY IN SANTA MONICA AND LOS ANGELES ON ROUTE 1 FROM 0.1 MILE WEST OF MAIN STREET OVERCROSSING TO ROUTE 1/10 SEPARATION AND ON ROUTE 10 FROM ROUTE 1/10 SEPARATION TO ROUTE 5/10 SEPARATION AND AT ROUTE 10/110 SEPARATION |
QA Service Level | 1 (Verified on 07/26/2019) |
Sample Information
Sample Taken Date | 05/04/2021 | Sample Unique Key | 14 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/07/2021 |
Sample type | Verification | A brief description of the sample | JMF 3/4" HMA-A-SP R15 0.5% LAS |
The quantity of what the sample constitutes | 3 Bags Coldfeed Agg., 2 Bags Rap | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Vulcan Materials Irwindale | Last name of sampler or witnessed by | QC |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 0264A-21 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Vulcan Materials Irwindale | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-19-0035::FISH CANYON QUARRY |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | 3/4 HMA-A-SP R15 | The fabricator/manufacturer designation for the sample | |
The plant number | 220831A IRW LTR | A detailed description of where the material sample was collected | Belt Cut at Vulcan Materials-Irwindale |
Where the material sample would have been placed if not sampled | Asphalt Paving | Primary Aggregate Nominal Size | 3/4 inch |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2021-05-04-14
DIME Test ID: 2021-05-04-14-4
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Test Release Date: 2021-05-21
Test Results
Input Type: Measured
Tester's full name: Danilo Ferrer
Date of test: 05/18/2021
Mass of saturated surface dry sample (before pycnometer) (S): 500 grams
Mass of the pycnometer with water and aggregate (C): 976.4 grams
Mass of the pycnometer with water (B): 663.7 grams
Mass of the oven dried sample (before pycnometer) (A): 490.3 grams
Mass of the saturated surface dry aggregate (for absorption) (S): 500 grams
Mass of the oven dry aggregate (for absorption) (A): 490.3 grams
Test Sample Preparation: Total Saturation
Bulk specific gravity: 2.618
Bulk specific gravity (SSD Basis): 2.670
Apparent specific gravity: 2.761
Absorption: 2 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 5/21/2021 ✔
Warning: The test results shown on this page have been superseded and are invalid.
This information is for reference only.