Sample Record

Owner Lab

  • CT - Southern Regional Laboratory

DIME Sample ID 2021-05-04-14

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 213603
DEA: 07301504
EFIS: 0714000020
DIST-CO-RTE-PM07-LA-1,10-R34.6/35.2,R2.1/18.4
Award Date11/19/2018
Closeout DateNot set
Work DescriptionREPLACING CONCRETE AND AC PAVEMENT
Location DescriptionLOS ANGELES COUNTY IN SANTA MONICA AND LOS ANGELES ON ROUTE 1 FROM 0.1 MILE WEST OF MAIN STREET OVERCROSSING TO ROUTE 1/10 SEPARATION AND ON ROUTE 10 FROM ROUTE 1/10 SEPARATION TO ROUTE 5/10 SEPARATION AND AT ROUTE 10/110 SEPARATION
QA Service Level1 (Verified on 07/26/2019)

Sample Information

Sample Taken Date05/04/2021 Sample Unique Key14
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing05/07/2021
Sample typeVerification A brief description of the sampleJMF 3/4" HMA-A-SP R15 0.5% LAS
The quantity of what the sample constitutes3 Bags Coldfeed Agg., 2 Bags Rap From where was the sample collectedManufacturer
First name of sampler or witnessed byVulcan Materials Irwindale Last name of sampler or witnessed byQC
Title of sampler Telephone number of sampler
Laboratory sample identification0264A-21 Linked DIME Sample ID
The fabricator/manufacturer/facility nameVulcan Materials Irwindale Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA or name of Pit)91-19-0035
The fabricator's/manufacturer's product name for the sample3/4 HMA-A-SP R15 The fabricator/manufacturer designation for the sample
The plant number220831A IRW LTR A detailed description of where the material sample was collectedBelt Cut at Vulcan Materials-Irwindale
Where the material sample would have been placed if not sampledAsphalt Paving Primary Aggregate Nominal Size3/4 inch
The concrete mix design number Lot number
Sublot number JMF Verification ID

Submitted Tests

DIME Test IDTest MethodTester NameTesting LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2021-05-04-14-1AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)Dominic Montemayor/Friday OfoegbuCT - Southern Regional Laboratory05/14/2021Satish Jain
Yes
05/21/2021Combined Virgin Aggregate Gradation
2021-05-04-14-2AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)Michael MaganaCT - Southern Regional Laboratory05/18/2021Satish Jain
Yes
05/21/2021
2021-05-04-14-3THIS TEST HAS BEEN SUPERSEDED.
AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)
Larry DiazCT - Southern Regional Laboratory05/18/2021Satish Jain
Yes
05/21/2021THIS TEST HAS BEEN SUPERSEDED.
2021-05-04-14-4THIS TEST HAS BEEN SUPERSEDED.
AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Danilo FerrerCT - Southern Regional Laboratory05/18/2021Satish Jain
Yes
05/21/2021THIS TEST HAS BEEN SUPERSEDED.
2021-05-04-14-5AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)Larry DiazCT - Southern Regional Laboratory05/18/2021Satish Jain
Yes
05/21/2021
2021-05-04-14-6AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)Larry DiazCT - Southern Regional Laboratory05/18/2021Satish Jain
Yes
05/21/2021
2021-05-04-14-7ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)Michael MaganaCT - Southern Regional Laboratory05/18/2021Satish Jain
Yes
05/21/2021
2021-05-04-14-8THIS TEST HAS BEEN SUPERSEDED.
AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)
Michael MaganaCT - Southern Regional Laboratory05/18/2021Satish Jain
Yes
05/21/2021THIS TEST HAS BEEN SUPERSEDED.
2021-05-04-14-9CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse AggregatesMichael MaganaCT - Southern Regional Laboratory05/19/2021Satish Jain
Yes
05/21/2021Rap Gradation After Ignition
2021-05-04-14-10CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse AggregatesDominic Montemayor/Friday Ofoegbu, Michael MaCT - Southern Regional Laboratory05/19/2021Satish Jain
Yes
06/09/2021Combined RAP/Virgin Aggregate Gradation W/Correlation Factors Applied