Summary for Test 2021-05-04-14-2
Test performed: AASHTO T335-09r13Project Information
| Project Identifiers | Project ID: 213603 DEA: 07301504 EFIS: 0714000020 |
|---|---|
| DIST-CO-RTE-PM | 07-LA-1,10-R34.6/35.2,R2.1/18.4 |
| Award Date | 11/19/2018 |
| Closeout Date | 01/18/2022 |
| Work Description | REPLACING CONCRETE AND AC PAVEMENT |
| Location Description | LOS ANGELES COUNTY IN SANTA MONICA AND LOS ANGELES ON ROUTE 1 FROM 0.1 MILE WEST OF MAIN STREET OVERCROSSING TO ROUTE 1/10 SEPARATION AND ON ROUTE 10 FROM ROUTE 1/10 SEPARATION TO ROUTE 5/10 SEPARATION AND AT ROUTE 10/110 SEPARATION |
| QA Service Level | 1 (Verified on 07/26/2019) |
Sample Information
| Sample Taken Date | 05/04/2021 | Sample Unique Key | 14 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/07/2021 |
| Sample type | Verification | A brief description of the sample | JMF 3/4" HMA-A-SP R15 0.5% LAS |
| The quantity of what the sample constitutes | 3 Bags Coldfeed Agg., 2 Bags Rap | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Vulcan Materials Irwindale | Last name of sampler or witnessed by | QC |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | 0264A-21 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Vulcan Materials Irwindale | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-19-0035::FISH CANYON QUARRY |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | 3/4 HMA-A-SP R15 | The fabricator/manufacturer designation for the sample | |
| The plant number | 220831A IRW LTR | A detailed description of where the material sample was collected | Belt Cut at Vulcan Materials-Irwindale |
| Where the material sample would have been placed if not sampled | Asphalt Paving | Primary Aggregate Nominal Size | 3/4 inch |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2021-05-04-14
DIME Test ID: 2021-05-04-14-2
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)
Test Release Date: 2021-05-21
Test Results
Method: 1 - Combined Fracture Determination
Aggregate Size and Fracture Type: Coarse 1 and 2 Faced and Fine 1 Faced
Input Type: Calculated
Tester's full name: Michael Magana
Date of test: 05/18/2021
Percentage of fractured, coarse, 2 faced particles tested: 100 %
Percentage of fractured, coarse, 1 faced particles tested: 100 %
Percentage of fractured, fine, 1 faced particles tested: 100 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 5/21/2021 ✔