DIME - Test Summary

Summary for Test 2021-04-05-28-9

Test performed: AASHTO T27-14

Project Identifiers	Project ID: 214764 DEA: 032H6404 EFIS: 0317000167
DIST-CO-RTE-PM	03-SAC-12,160-0.4/0.9,L10.5/R0.2
Award Date	05/20/2020
Closeout Date	05/11/2022
Work Description	MODIFY SIGNAL AND LIGHTING SYSTEM, PLACE RHMA AND ROADWAY EXCAVATION.
Location Description	SACRAMENTO COUNTY NEAR RIO VISTA ON ROUTE 12 FROM 0.6 MILE EAST OF SACRAMENTO RIVER BRIDGE TO 5.2 MILES WEST OF MOKELUMNE RIVER BRIDGE AND ON ROUTE 160 FROM 3.6 MILES NORTH OF THREE MILE SLOUGH BRIDGE TO 2.7 MILES SOUTH OF CIRCLE DRIVE
QA Service Level	1 (Verified on 03/24/2020)

Sample Taken Date	04/05/2021	Sample Unique Key	28
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	04/06/2021
Sample type	Verification	A brief description of the sample	3/4" (Nominal Size) Untreated Virgin Aggregate.
The quantity of what the sample constitutes	JMF Verification	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	George Reed Personnel (SAMPLER)	Last name of sampler or witnessed by	Moses Onejeme (WITNESS)
Title of sampler		Telephone number of sampler
Laboratory sample identification	JMF21-011	Linked DIME Sample ID
The fabricator/manufacturer/facility name	George Reed Inc- Clements Batch Plant	Transportation Laboratory (TL) Number	C123456
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-03-0020::JACKSON VALLEY QUARRY
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Batch Plant Hot Bins
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

DIME Sample ID: 2021-04-05-28

DIME Test ID: 2021-04-05-28-9

Testing Lab: CT D03 - Olivehurst Northern Regional Laboratory

Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)

Test Release Date: 2021-05-11

What type of gradation is being tested?: HMA Gradation

Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained

Does this test use 1/4 sieve? (question for HMA Gradation Type): No

Has the fine aggregate sample been reduced?: No

Input Type: Calculated

Tester's full name: Julian Gonzales

Date of test: 04/21/2021

Cumulative percent passing the 1 1/2 in. sieve: 100 %

Cumulative percent passing the 1 in. sieve: 100 %

Cumulative percent passing the 3/4 in. sieve: 97 %

Cumulative percent passing the 1/2 in. sieve: 81 %

Cumulative percent passing the 3/8 in. sieve: 70 %

Cumulative percent passing the #4 sieve: 32 %

Cumulative percent passing the #8 sieve: 18 %

Cumulative percent passing the #16 sieve: 13 %

Cumulative percent passing the #30 sieve: 8 %

Cumulative percent passing the #50 sieve: 5 %

Cumulative percent passing the #100 sieve: 3 %

Cumulative percent passing the #200 sieve: 2.1 %

General comments (publicly viewable) (Max 1000 characters): JMF21-011.

Test was verified on 5/11/2021 ✔