DIME - Sample Record for DIME Sample ID 2021-04-05-28

DIME » All Projects » Project - DEA: 032H6404 » Sample 2021-04-05-28 » Sample Details

Sample Record

Owner Lab

CT D03 - Olivehurst Northern Regional Laboratory

DIME Sample ID 2021-04-05-28

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 214764 DEA: 032H6404 EFIS: 0317000167
DIST-CO-RTE-PM	03-SAC-12,160-0.4/0.9,L10.5/R0.2
Award Date	05/20/2020
Closeout Date	05/11/2022
Work Description	MODIFY SIGNAL AND LIGHTING SYSTEM, PLACE RHMA AND ROADWAY EXCAVATION.
Location Description	SACRAMENTO COUNTY NEAR RIO VISTA ON ROUTE 12 FROM 0.6 MILE EAST OF SACRAMENTO RIVER BRIDGE TO 5.2 MILES WEST OF MOKELUMNE RIVER BRIDGE AND ON ROUTE 160 FROM 3.6 MILES NORTH OF THREE MILE SLOUGH BRIDGE TO 2.7 MILES SOUTH OF CIRCLE DRIVE
QA Service Level	1 (Verified on 03/24/2020)

Sample Information

Sample Taken Date	04/05/2021	Sample Unique Key	28
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	04/06/2021
Sample type	Verification	A brief description of the sample	3/4" (Nominal Size) Untreated Virgin Aggregate.
The quantity of what the sample constitutes	JMF Verification	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	George Reed Personnel (SAMPLER)	Last name of sampler or witnessed by	Moses Onejeme (WITNESS)
Title of sampler		Telephone number of sampler
Laboratory sample identification	JMF21-011	Linked DIME Sample ID
The fabricator/manufacturer/facility name	George Reed Inc- Clements Batch Plant	Transportation Laboratory (TL) Number	C123456
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Information

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-03-0020::JACKSON VALLEY QUARRY
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Batch Plant Hot Bins
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

JMF Information

Verification ID	JMF3513-2021-50	Date Created	05/06/2021
JMF Submittal ID	JMF3511-23-2021-62	JMF Status	Submittal Authorized For Use
Producer Mix ID	2021-CLM-004R-VSS	Authorized Date	09/10/2021

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2021-04-05-28-1	AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)	Thomas Stinnett, CT D03 - Olivehurst Northern Regional Laboratory	04/27/2021	Kavon Rastegar	Yes	05/10/2021	JMF21-011.
2021-04-05-28-2	AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)	Jeff Herbert, CT D03 - Olivehurst Northern Regional Laboratory	04/29/2021	Kavon Rastegar	Yes	05/10/2021	JMF21-011.
2021-04-05-28-3	AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)	Julian Gonzales, CT D03 - Olivehurst Northern Regional Laboratory	04/23/2021	Kavon Rastegar	Yes	05/10/2021	JMF21-011.
2021-04-05-28-4	AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)	Thomas Stinnett, CT D03 - Olivehurst Northern Regional Laboratory	04/23/2021	Kavon Rastegar	Yes	05/10/2021	JMF21-011.
2021-04-05-28-5	ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)	Thomas Stinnett, CT D03 - Olivehurst Northern Regional Laboratory	04/23/2021	Kavon Rastegar	Yes	05/10/2021	JMF21-011.
2021-04-05-28-6	CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index)	Jeff Herbert, CT D03 - Olivehurst Northern Regional Laboratory	04/23/2021	Kavon Rastegar	Yes	05/10/2021	JMF21-011.
2021-04-05-28-7	AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)	Julian Gonzales, CT D03 - Olivehurst Northern Regional Laboratory	04/22/2021	Kavon Rastegar	Yes	05/11/2021	JMF21-011.
2021-04-05-28-8	AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)	Thomas Stinnett, CT D03 - Olivehurst Northern Regional Laboratory	04/23/2021	Kavon Rastegar	Yes	05/11/2021	JMF21-011. Report only.
2021-04-05-28-9	AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)	Julian Gonzales, CT D03 - Olivehurst Northern Regional Laboratory	04/21/2021	Kavon Rastegar	Yes	05/11/2021	JMF21-011.

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2021-04-05-28-1 AASHTO T335-09r13 (Verified)
DIME Test ID: 2021-04-05-28-2 AASHTO T96-02r10 (Verified)
DIME Test ID: 2021-04-05-28-3 AASHTO T176-08 (Verified)
DIME Test ID: 2021-04-05-28-4 AASHTO T304-11 (Verified)
DIME Test ID: 2021-04-05-28-5 ASTM D4791-10 (Verified)
DIME Test ID: 2021-04-05-28-6 CTM 204-June 2010 (Verified)
DIME Test ID: 2021-04-05-28-7 AASHTO T85-13 (Verified)
DIME Test ID: 2021-04-05-28-8 AASHTO T84-14 (Verified)
DIME Test ID: 2021-04-05-28-9 AASHTO T27-14 (Verified)