Summary for Test 2021-02-19-27-1
Test performed: ASTM F606-14aProject Information
| Project Identifiers | Project ID: 212244 DEA: 044G8404 EFIS: 0413000051 |
|---|---|
| DIST-CO-RTE-PM | 04-NAP-128-20.1/20.4 |
| Award Date | 02/19/2019 |
| Closeout Date | 06/27/2023 |
| Work Description | REPLACE CAPELL CREEK BRIDGE |
| Location Description | NAPA COUNTY ABOUT 15 MILES EAST OF RUTHERFORD FROM 1.1 MILES EAST OF KNOXVILLE ROAD TO 0.3 MILE WEST OF CAPELL VALLEY CREST |
| QA Service Level | 1 (Verified on 05/20/2017) |
Sample Information
| Sample Taken Date | 02/19/2021 | Sample Unique Key | 27 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 02/19/2021 |
| Sample type | Department Acceptance | A brief description of the sample | 7/8 X9-1/2 A-325 HSB Assy |
| The quantity of what the sample constitutes | 1 Lot of 100 | From where was the sample collected | Source |
| First name of sampler or witnessed by | Jason | Last name of sampler or witnessed by | Gramlick |
| Title of sampler | Associate Steel Inspector | Telephone number of sampler | 707-649-5471 |
| Laboratory sample identification | B-3-230-21 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Saint Louis Screw and Bolt | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Cappell Creek Replacement |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | TT0137677 |
|---|---|---|---|
| Heat Number(s) | Bolt 20424730 Nut GER75070777 Washer X1806 | Nut Mfg. Lot Number(s) | 813568 |
| Washer Mfg. Lot Number(s) | D8010 | Bolt Specification | A-325 |
| Bolt Length(s) | 9-1/2" | Nut Specification | A-563-DH |
| Washer Specification | F-436 | Finish | Mechanical Galv. |
| Diameter/Size | 7/8" | Bolt Mfg. Lot Number | BM0372 |
| Rocap Test Requirement(s) | Lubricant Requirements(s) |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2021-02-19-27
DIME Test ID: 2021-02-19-27-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Test Release Date: 2021-03-10
Test Results
Number of Bolt Samples: 1
Input Type: Measured
Tester's full name: spaine
Date of test: 03/03/2021
UTM: 450kip
Temperature: no data
| Num | Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Wedge Angle (deg) | Comments | Tested By |
|---|---|---|---|---|---|---|---|---|
| 1 | 1A | BM0372 | 0.8750 | 67128 | 298.6 | 10.00 | A325 Wedge Tensile | spaine |
General comments (publicly viewable) (Max 1000 characters): A325 Wedge Tensile
Test Graph
Source: Bluehill Data Point FileTest was verified on 3/10/2021 ✔