Sample Record

Owner Lab

  • CT HQ - Sacramento Structural Materials Testing Laboratory

DIME Sample ID 2021-02-19-27

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 212244
DEA: 044G8404
EFIS: 0413000051
DIST-CO-RTE-PM04-NAP-128-20.1/20.4
Award Date02/19/2019
Closeout Date06/27/2023
Work DescriptionREPLACE CAPELL CREEK BRIDGE
Location DescriptionNAPA COUNTY ABOUT 15 MILES EAST OF RUTHERFORD FROM 1.1 MILES EAST OF KNOXVILLE ROAD TO 0.3 MILE WEST OF CAPELL VALLEY CREST
QA Service Level1 (Verified on 05/20/2017)

Sample Information

Sample Taken Date02/19/2021 Sample Unique Key27
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing02/19/2021
Sample typeDepartment Acceptance A brief description of the sample7/8 X9-1/2 A-325 HSB Assy
The quantity of what the sample constitutes1 Lot of 100 From where was the sample collectedSource
First name of sampler or witnessed byJason Last name of sampler or witnessed byGramlick
Title of samplerAssociate Steel Inspector Telephone number of sampler707-649-5471
Laboratory sample identificationB-3-230-21 Linked DIME Sample ID
The fabricator/manufacturer/facility nameSaint Louis Screw and Bolt Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure nameCappell Creek Replacement

Material Information

Material TypeSMTL TM3 - Fastener Assembly Rocap Number(s)TT0137677
Heat Number(s)Bolt 20424730 Nut GER75070777 Washer X1806 Nut Mfg. Lot Number(s)813568
Washer Mfg. Lot Number(s)D8010 Bolt SpecificationA-325
Bolt Length(s)9-1/2" Nut SpecificationA-563-DH
Washer SpecificationF-436 FinishMechanical Galv.
Diameter/Size7/8" Bolt Mfg. Lot NumberBM0372
Rocap Test Requirement(s) Lubricant Requirements(s)

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2021-02-19-27-1ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)spaine, CT HQ - Sacramento Structural Materials Testing Laboratory03/03/2021spaine
Yes
03/10/2021A325 Wedge Tensile
2021-02-19-27-2ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)spaine, CT HQ - Sacramento Structural Materials Testing Laboratory03/03/2021spaine
Yes
03/10/2021Nut Proof Load
2021-02-19-27-3ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory03/08/2021Steven Paine
Yes
03/10/2021
2021-02-19-27-4ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory03/08/2021Steven Paine
Yes
03/10/2021
2021-02-19-27-5ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory03/08/2021Steven Paine
Yes
03/10/2021
2021-02-19-27-6ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory03/08/2021Steven Paine
Yes
03/10/2021
2021-02-19-27-7ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory03/08/2021Steven Paine
Yes
03/10/2021
2021-02-19-27-8ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory03/08/2021Steven Paine
Yes
03/10/2021
2021-02-19-27-9ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory03/08/2021Steven Paine
Yes
03/10/2021
2021-02-19-27-10ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory03/08/2021Steven Paine
Yes
03/10/2021

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2021-02-19-27-1 ASTM F606-14a (Verified)
DIME Test ID: 2021-02-19-27-2 ASTM F606-14a (Verified)
DIME Test ID: 2021-02-19-27-3 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-02-19-27-4 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-02-19-27-5 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-02-19-27-6 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-02-19-27-7 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-02-19-27-8 ASME B1.2-83r01 (Verified)
DIME Test ID: 2021-02-19-27-9 ASTM B499-14 (Verified)
DIME Test ID: 2021-02-19-27-10 ASTM B499-14 (Verified)
DIME Test ID: 2021-02-19-27-11 ASTM B499-14 (Verified)
DIME Test ID: 2021-02-19-27-12 ASTM B499-14 (Verified)
DIME Test ID: 2021-02-19-27-13 ASTM B499-14 (Verified)
DIME Test ID: 2021-02-19-27-14 ASTM B499-14 (Verified)
DIME Test ID: 2021-02-19-27-15 ASTM B499-14 (Verified)
DIME Test ID: 2021-02-19-27-16 ASTM B499-14 (Verified)
DIME Test ID: 2021-02-19-27-17 ASTM B499-14 (Verified)
DIME Test ID: 2021-02-19-27-18 ASTM E18-15 (Verified)
DIME Test ID: 2021-02-19-27-19 ASTM E18-15 (Verified)