Owner Lab
- CT HQ - Sacramento Cement Testing Laboratory
DIME Sample ID 2017-01-09-2
Sample is locked from editing. info
Project Information
| Project Identifiers | Project ID: 88888
DEA: STOCK
EFIS: STOCK |
|---|
| DIST-CO-RTE-PM | 59--- |
|---|
| Award Date | Not set |
|---|
| Closeout Date | Not set |
|---|
| Work Description | Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680. |
|---|
| Location Description | Not set |
|---|
| QA Service Level | NOT VERIFIED |
|---|
Sample Information
| Sample Taken Date | 01/09/2017 |
Sample Unique Key | 2 |
|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 01/09/2017 |
|---|
| Sample type | Annual Source Testing |
A brief description of the sample | Unknown |
|---|
| The quantity of what the sample constitutes | 1 Bucket |
From where was the sample collected | Source |
|---|
| First name of sampler or witnessed by | Unknown |
Last name of sampler or witnessed by | Unknown |
|---|
| Title of sampler | Unknown |
Telephone number of sampler | Unknown |
|---|
| Laboratory sample identification | CM175701 |
Linked DIME Sample ID | Unknown |
|---|
| The fabricator/manufacturer/facility name | LaFarge |
Transportation Laboratory (TL) Number | Unknown |
|---|
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown |
Structure unique identifier | Not set |
|---|
| Structure name | Not set |
|---|
Material Information
| Material Type | Cementitious |
Brand | LaFarge |
|---|
| Mill | Seattle |
Type of Cementitious Material | Blended Cement |
|---|
Submitted Tests
| DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
| 2017-01-09-2-2 | ASTM C109-11: Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens) | TTO | CT HQ - Sacramento Cement Testing Laboratory | 02/17/2017 | | Yes | 07/24/2018 | 3 Day Break |
|
| 2017-01-09-2-3 | ASTM C109-11: Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens) | Timothy OMalley | CT HQ - Sacramento Cement Testing Laboratory | 02/21/2017 | | Yes | 07/24/2018 | 7 Day Break |
|
| 2017-01-09-2-4 | ASTM C109-11: Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens) | TTO | CT HQ - Sacramento Cement Testing Laboratory | 03/14/2017 | | Yes | 07/24/2018 | 28 Day Break |
|
| 2017-01-09-2-5 | ASTM C188-15: Standard Test Method for Density of Hydraulic Cement | Ben Lenz | CT HQ - Sacramento Cement Testing Laboratory | 02/08/2017 | timothy omalley | Yes | 07/24/2018 | |
|
| 2017-01-09-2-6 | ASTM C185-15a: Standard Test Method for Air Content of Hydraulic Cement Mortar | timothy omalley | CT HQ - Sacramento Cement Testing Laboratory | 01/20/2017 | timothy omalley | Yes | 07/24/2018 | |
|
| 2017-01-09-2-7 | ASTM C191-13: Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle | timothy omalley | CT HQ - Sacramento Cement Testing Laboratory | 03/06/2017 | timothy omalley | Yes | 07/24/2018 | |
|
| 2017-01-09-2-8 | ASTM C204-11: Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus | timothy omalley | CT HQ - Sacramento Cement Testing Laboratory | 02/09/2017 | timothy omalley | Yes | 07/24/2018 | |
|
| 2017-01-09-2-9 | ASTM C430-8: Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve | Benjamin Lenz | CT HQ - Sacramento Cement Testing Laboratory | 01/17/2017 | Benjamin Lenz | Yes | 07/24/2018 | |
|
2338523461239452394622562238442317646854
