Sample Record
Owner Lab
- CT D08 - Fontana Southern Regional Laboratory
DIME Sample ID 2024-04-24-34
Project Information
Project Identifiers | Project ID: 995232 DEA: 120U1704 EFIS: 1223000051 |
---|---|
DIST-CO-RTE-PM | 12-ORA-133,261-9.8/12.6,0.0/3.5 |
Award Date | 12/27/2023 |
Closeout Date | Not set |
Work Description | COLD PLANE, OVERLAY, AND REFRESH PAVEMENT DELINEATION. |
Location Description | ORANGE COUNTY IN IRVINE ON ROUTE 133 FROM TECHNOLOGY DRIVE UNDERCROSSING TO PORTOLA PARKWAY UNDERCROSSING AND ON ROUTE 261 FROM WALNUT AVENUE OVERCROSSING TO 0.6 MILE NORTH OF PORTOLA PARKWAY OVERCROSSING |
QA Service Level | 1 (Verified on 10/16/2023) |
Sample Information
Sample Taken Date | 04/24/2024 | Sample Unique Key | 34 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 04/29/2024 |
Sample type | Verification | A brief description of the sample | JMF 1/2" WMA-A-SP R15 0.40% EVO P25 |
The quantity of what the sample constitutes | 4 Bags of Combined Aggregate, 2 Bags of RAP | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Victor | Last name of sampler or witnessed by | Capacete QC |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 0200A-24 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | AAA-Corona Quarry/SJR/Ingevity | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-33-0005 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | AAA-Corona | |
Where the material sample would have been placed if not sampled | Asphalt Paving | Primary Aggregate Nominal Size | 1/2 inch |
The concrete mix design number | 102775 | Lot number | |
Sublot number | Aggregate Mix Number |
Submitted Tests
DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
---|---|---|---|---|---|---|---|---|
2024-04-24-34-1 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | David Padilla, CT D08 - Fontana Southern Regional Laboratory | 05/08/2024 | Satish Jain | No | Rap Gradation after Ignition | Info | |
2024-04-24-34-2 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | M.Campos/David Padilla, CT D08 - Fontana Southern Regional Laboratory | 05/08/2024 | Satish Jain | No | Comb. Virgin Aggregate Gradation W/Rap Gradation Correlation Factors | Info | |
2024-04-24-34-3 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 05/04/2024 | Satish Jain | No | Info | ||
2024-04-24-34-4 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 05/04/2024 | Satish Jain | No | Info | ||
2024-04-24-34-5 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 05/04/2024 | Satish Jain | No | Info | ||
2024-04-24-34-6 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | Larry Diaz, CT D08 - Fontana Southern Regional Laboratory | 05/03/2024 | Satish Jain | No | Info | ||
2024-04-24-34-7 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | David Padilla, CT D08 - Fontana Southern Regional Laboratory | 05/07/2024 | Satish Jain | No | Info | ||
2024-04-24-34-8 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | Larry Diaz, CT D08 - Fontana Southern Regional Laboratory | 05/01/2024 | Satish Jain | No | Info | ||
2024-04-24-34-9 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Friday Ofoegbu, CT D08 - Fontana Southern Regional Laboratory | 05/02/2024 | Satish Jain | No | Info | ||
2024-04-24-34-10 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | M.Campos/David Padilla, CT D08 - Fontana Southern Regional Laboratory | 05/03/2024 | Satish Jain | No | Combined Virgin Aggregate Gradation | Info |
Sample File Attachments
File Name | Extension | Date Uploaded | Actions |
---|---|---|---|
No results found. |
Test File Attachments
DIME Test ID: 2024-04-24-34-1 CTM 202-November 2011
DIME Test ID: 2024-04-24-34-2 CTM 202-November 2011
DIME Test ID: 2024-04-24-34-3 ASTM D4791-10
DIME Test ID: 2024-04-24-34-4 AASHTO T335-09r13
DIME Test ID: 2024-04-24-34-5 AASHTO T304-11
DIME Test ID: 2024-04-24-34-6 AASHTO T176-08
DIME Test ID: 2024-04-24-34-7 AASHTO T96-02r10
DIME Test ID: 2024-04-24-34-8 AASHTO T85-13
DIME Test ID: 2024-04-24-34-9 AASHTO T84-14
DIME Test ID: 2024-04-24-34-10 AASHTO T27-14