Sample Record
Owner Lab
- CT D11 - District 11 Materials Laboratory
DIME Sample ID 2024-04-13-2
Project Information
Project Identifiers | Project ID: 994903 DEA: 11430244 EFIS: 1118000033 |
---|---|
DIST-CO-RTE-PM | 11-SD,-125-9.3/13.0 |
Award Date | 09/06/2023 |
Closeout Date | Not set |
Work Description | PLACE HMA, RHMA, SLAB REPLACEMENT, AND ELECTRICAL WORK. |
Location Description | SAN DIEGO COUNTY IN AND NEAR LEMON GROVE FROM 0.3 MILE SOUTH OF ELKELTON PLACE UNDERCROSSING TO 0.2 MILE SOUTH OF ROUTE 125/94 SEPARATION |
QA Service Level | 1 (Verified on 11/14/2023) |
Sample Information
Sample Taken Date | 04/13/2024 | Sample Unique Key | 2 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 04/15/2024 |
Sample type | Quality Assurance | A brief description of the sample | 3/4" HMA PSU |
The quantity of what the sample constitutes | 3 Bags | From where was the sample collected | Source |
First name of sampler or witnessed by | Ben | Last name of sampler or witnessed by | Smith |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 0109-PSU | Linked DIME Sample ID | 2024-04-13-1 |
The fabricator/manufacturer/facility name | Vulcan Otay | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-37-0035 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Plant | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number |
Submitted Tests
DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
---|---|---|---|---|---|---|---|---|
2024-04-13-2-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Mohammad Abbassi, CT D11 - District 11 Materials Laboratory | 04/19/2024 | Mohammad Abbassi | No | Info | ||
2024-04-13-2-2 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Mohammad Abbassi, CT D11 - District 11 Materials Laboratory | 04/19/2024 | Mohammad Abbassi | No | Info | ||
2024-04-13-2-3 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Mohammad Abbassi, CT D11 - District 11 Materials Laboratory | 04/19/2024 | Mohammad Abbassi | No | Info | ||
2024-04-13-2-6 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Mohammad Abbassi, CT D11 - District 11 Materials Laboratory | 04/19/2024 | Mohammad Abbassi | No | Info | ||
2024-04-13-2-8 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | Mohammad Abbassi, CT D11 - District 11 Materials Laboratory | 04/19/2024 | Mohammad Abbassi | No | Complies | Info | |
2024-04-13-2-9 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Mohammad Abbassi, CT D11 - District 11 Materials Laboratory | 04/19/2024 | Mohammad Abbassi | No | Complies | Info | |
2024-04-13-2-10 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | Mohammad Abbassi, CT D11 - District 11 Materials Laboratory | 04/19/2024 | Mohammad Abbassi | No | Info | ||
2024-04-13-2-11 | AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis) | Shawn Rivers, CT D11 - District 11 Materials Laboratory | 04/19/2024 | Shawn Rivers | No | Info |
Sample File Attachments
File Name | Extension | Date Uploaded | Actions |
---|---|---|---|
No results found. |
Test File Attachments
DIME Test ID: 2024-04-13-2-1 AASHTO T27-14
DIME Test ID: 2024-04-13-2-2 AASHTO T335-09r13
DIME Test ID: 2024-04-13-2-3 ASTM D4791-10
DIME Test ID: 2024-04-13-2-6 AASHTO T84-14
DIME Test ID: 2024-04-13-2-8 AASHTO T85-13
DIME Test ID: 2024-04-13-2-9 AASHTO T96-02r10
DIME Test ID: 2024-04-13-2-10 AASHTO T304-11
DIME Test ID: 2024-04-13-2-11 AASHTO T30-19