DIME - Sample Record for DIME Sample ID 2024-04-09-9

DIME » All Projects » Project - DEA: 010G1404 » Sample 2024-04-09-9 » Sample Details

Sample Record

Owner Lab

CT HQ - QASI Sacramento Field Office

DIME Sample ID 2024-04-09-9

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 993715 DEA: 010G1404 EFIS: 0116000129
DIST-CO-RTE-PM	01-HUM-96,169-VAR
Award Date	11/16/2022
Closeout Date	Not set
Work Description	HUM 96-169 5 Bridges Rail Upgrade (Do not include in project name: STRUCTURAL STEEL, CONCRETE BARRIER, POLYESTER CONCRETE OVERLAY)
Location Description	HUMBOLDT COUNTY ON ROUTES 96 AND 169 AT VARIOUS LOCATIONS (Bridge Nos. 04-0215, 04-0059, 04-0063, 04-0225, 04-0061)
QA Service Level	1 (Verified on 04/19/2022)

Sample Information

Sample Taken Date	04/09/2024	Sample Unique Key	9
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	04/12/2024
Sample type	Quality Assurance	A brief description of the sample	A563 DH HVY Hex HDG Nut
The quantity of what the sample constitutes	1,980 Nuts	From where was the sample collected	Fabricator
First name of sampler or witnessed by	Jamie	Last name of sampler or witnessed by	Doe
Title of sampler	Associate Steel Inspector	Telephone number of sampler	(916) 838-4405
Laboratory sample identification		Linked DIME Sample ID
The fabricator/manufacturer/facility name	C&K Johnson Industries	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form	S50-015-24	Structure unique identifier
Structure name

Material Information

Material Type	SMTL TM3 - Fastener Assembly	Rocap Number(s)	W000105254R, E016N1R, W000105296R
Heat Number(s)	8000025147	Nut Mfg. Lot Number(s)	W000110995
Washer Mfg. Lot Number(s)		Bolt Specification	ASTM A325
Bolt Length(s)		Nut Specification	ASTM A563
Washer Specification	ASTM F436	Finish	ASTM F2329
Diameter/Size	1-8	Bolt Mfg. Lot Number
Rocap Test Requirement(s)		Lubricant Requirements(s)

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2024-04-09-9-1	ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	<None>, CT HQ - Sacramento Structural Materials Testing Laboratory	04/17/2024	<None>	Yes	04/19/2024	Proof Load
2024-04-09-9-2	ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	<None>, CT HQ - Sacramento Structural Materials Testing Laboratory	04/17/2024	<None>	Yes	04/19/2024	Proof Load
2024-04-09-9-3	ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)	Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory	04/17/2024	Andrew Auvinen	Yes	04/19/2024
2024-04-09-9-4	ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)	Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory	04/17/2024	Andrew Auvinen	Yes	04/19/2024
2024-04-09-9-5	ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)	Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory	04/17/2024	Andrew Auvinen	Yes	04/19/2024
2024-04-09-9-6	ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory	04/17/2024	Andrew Auvinen	Yes	04/19/2024
2024-04-09-9-7	ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory	04/17/2024	Andrew Auvinen	Yes	04/19/2024
2024-04-09-9-8	ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory	04/17/2024	Andrew Auvinen	Yes	04/19/2024

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2024-04-09-9-1 ASTM F606-21 (Verified)
DIME Test ID: 2024-04-09-9-2 ASTM F606-21 (Verified)
DIME Test ID: 2024-04-09-9-3 ASME B1.2-83r17 (Verified)
DIME Test ID: 2024-04-09-9-4 ASME B1.2-83r17 (Verified)
DIME Test ID: 2024-04-09-9-5 ASME B1.2-83r17 (Verified)
DIME Test ID: 2024-04-09-9-6 ASTM B499-09r21 (Verified)
DIME Test ID: 2024-04-09-9-7 ASTM B499-09r21 (Verified)
DIME Test ID: 2024-04-09-9-8 ASTM B499-09r21 (Verified)