Sample Record

Owner Lab

  • CT D11 - District 11 Materials Laboratory

DIME Sample ID 2024-03-13-12

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 994903
DEA: 11430244
EFIS: 1118000033
DIST-CO-RTE-PM11-SD,-125-9.3/13.0
Award Date09/06/2023
Closeout DateNot set
Work DescriptionPLACE HMA, RHMA, SLAB REPLACEMENT, AND ELECTRICAL WORK.
Location DescriptionSAN DIEGO COUNTY IN AND NEAR LEMON GROVE FROM 0.3 MILE SOUTH OF ELKELTON PLACE UNDERCROSSING TO 0.2 MILE SOUTH OF ROUTE 125/94 SEPARATION
QA Service Level1 (Verified on 11/14/2023)

Sample Information

Sample Taken Date03/13/2024 Sample Unique Key12
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing03/14/2024
Sample typeQuality Assurance A brief description of the sample1 1/2" HMA
The quantity of what the sample constitutes12 boxes From where was the sample collectedSource
First name of sampler or witnessed byBen Last name of sampler or witnessed bySmith
Title of sampler Telephone number of sampler
Laboratory sample identification0108-JMF Linked DIME Sample ID
The fabricator/manufacturer/facility nameVulcan Otay Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeHot Mix Asphalt HMA TypeType A HMA
HMA Grading1 inch Lot number
Sublot number HMA Mix Number820801 Otay Val

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2024-03-13-12-1AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Daniel Smith / J Seymour, CT D11 - District 11 Materials Laboratory03/25/2024Daniel Smith
Yes
03/25/2024Complies Target 3.90% -.3 to +.5 Tested 4.32%
2024-03-13-12-2AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Daniel Smith / J Seymour, CT D11 - District 11 Materials Laboratory03/14/2024Daniel Smith
Yes
03/25/2024Complies Target 2.552 +/-.02 Tested 2.540
2024-03-13-12-3AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Daniel Smith / J Seymour, CT D11 - District 11 Materials Laboratory03/14/2024Daniel Smith
Yes
03/25/2024Complies Target 5.0% +/-1.5% V1-4.8% V2-4.7% V3-5.0%
2024-03-13-12-4AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Daniel Smith, CT D11 - District 11 Materials Laboratory03/20/2024Daniel Smith
Yes
03/25/2024Complies Target 5.0% +/- 1.5% Average 4.8%
2024-03-13-12-5AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)Daniel Smith / J Seymour, CT D11 - District 11 Materials Laboratory03/21/2024Daniel Smith
Yes
03/25/2024Complies WET >70 DRY>100
2024-03-13-12-6CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix AsphaltDaniel Smith / J Seymour, CT D11 - District 11 Materials Laboratory03/20/2024Daniel Smith
Yes
03/25/2024Complies Target < 12.7 mm
2024-03-13-12-7AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Daniel Smith, CT D11 - District 11 Materials Laboratory03/20/2024Daniel Smith
Yes
03/25/2024Complies 3 RAP Burns R1-8.19 R2-7.69 R3-8.87

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2024-03-13-12-1 AASHTO T308-10 (Verified)
DIME Test ID: 2024-03-13-12-2 AASHTO T209-22 (Verified)
DIME Test ID: 2024-03-13-12-3 AASHTO T275-07r12 (Verified)
DIME Test ID: 2024-03-13-12-4 AASHTO T269-14 (Verified)
DIME Test ID: 2024-03-13-12-5 AASHTO T283-14 (Verified)
DIME Test ID: 2024-03-13-12-6 CTM 389-19 (Verified)
DIME Test ID: 2024-03-13-12-7 AASHTO T308-10 (Verified)