DIME » All Projects » Project - DEA: 023J7704 » Sample 2023-08-14-100 » Sample Details

Sample Record

Owner Lab

  • CT D02 - Redding Northern Regional Laboratory

DIME Sample ID 2023-08-14-100

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 994387
DEA: 023J7704
EFIS: 0222000082
DIST-CO-RTE-PM02-SIS-96-97.2/103.0
Award Date12/23/2022
Closeout Date04/11/2024
Work DescriptionRHMA OVERLAY, REPLACE AC SURFACING, GUARDRAIL AND TRAFFIC STRIPE.
Location DescriptionSISKIYOU COUNTY ABOUT 21 MILES EAST OF HORSE CREEK FROM 4.2 MILES EAST OF EMPIRE CREEK BRIDGE TO 0.4 MILE WEST OF ROUTE 263
QA Service Level1 (Verified on 03/28/2023)

Sample Information

Sample Taken Date08/14/2023 Sample Unique Key100
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing08/14/2023
Sample typeProduction Start-Up A brief description of the sampleLime Treated 1/2-inch RHMA-G (PG 64-16 CR)
The quantity of what the sample constitutesProduction Start-Up Evaluation From where was the sample collectedManufacturer
First name of sampler or witnessed byJoe Last name of sampler or witnessed byDelgado
Title of sampler Telephone number of sampler
Laboratory sample identificationD79326 Linked DIME Sample ID
The fabricator/manufacturer/facility nameTullis — Northstate Asphalt (Redding, CA) Transportation Laboratory (TL) Number841611
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeHot Mix Asphalt HMA TypeRHMA-G
HMA Grading1/2 inch Lot number1
Sublot number1 HMA Mix NumberJMF3513202318

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2023-08-14-100-1AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Terry Mc Cormick, CT D02 - Redding Northern Regional Laboratory08/15/2023Ward Jenkins
Yes
02/08/2024Pb=7.78%
2023-08-14-100-2AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Josh Murphy, CT D02 - Redding Northern Regional Laboratory08/14/2023Ward Jenkins
Yes
02/08/2024Gmm=2.434
2023-08-14-100-4AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Josh Murphy, CT D02 - Redding Northern Regional Laboratory08/17/2023Ward Jenkins
Yes
02/08/2024Gmb=2.330
2023-08-14-100-5AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Josh Murphy, CT D02 - Redding Northern Regional Laboratory08/17/2023Ward Jenkins
Yes
02/08/2024CT 366: S=37; AASHTO T 269: Pa=4.3%; MS-2: VMA=18.2%, VFA=76.6%, DP=0.7
2023-08-14-100-6AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)Murphy, Sweeny, and TM, CT D02 - Redding Northern Regional Laboratory10/12/2023Ward Jenkins
Yes
02/08/2024S1=119, S2=106, TSR=89%
2023-08-14-100-7CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix AsphaltDennis Hickey, CT D02 - Redding Northern Regional Laboratory08/25/2023Ward Jenkins
Yes
02/08/2024CT 389: Nf>15000, SIP>15000; CT 360: SA=0.1g/cm²

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2023-08-14-100-1 AASHTO T308-10 (Verified)
DIME Test ID: 2023-08-14-100-2 AASHTO T209-12 (Verified)
DIME Test ID: 2023-08-14-100-4 AASHTO T275-07r12 (Verified)
DIME Test ID: 2023-08-14-100-5 AASHTO T269-14 (Verified)
DIME Test ID: 2023-08-14-100-6 AASHTO T283-14 (Verified)
DIME Test ID: 2023-08-14-100-7 CTM 389-19 (Verified)