Sample Record

Owner Lab

  • CT D02 - Redding Northern Regional Laboratory

DIME Sample ID 2023-08-07-92

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 215157
DEA: 021H5704
EFIS: 0216000036
Award Date02/09/2023
Closeout DateNot set
QA Service Level1 (Verified on 09/03/2020)

Sample Information

Sample Taken Date08/07/2023 Sample Unique Key92
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing08/07/2023
Sample typeProduction Start-Up A brief description of the sampleLime Treated 3/4-inch Type A HMA (eq. PG 64-28 M) with 23.6% RAP and virgin PG 58-34 M binder from Valero (Benicia, CA)
The quantity of what the sample constitutesProduction Start-Up Evaluation From where was the sample collectedManufacturer
First name of sampler or witnessed byCindy Last name of sampler or witnessed byBryant
Title of sampler Telephone number of sampler
Laboratory sample identificationD79308 Linked DIME Sample ID
The fabricator/manufacturer/facility nameJ.F. Shea Construction — Fawndale Rock and Asphalt (Redding, CA) Transportation Laboratory (TL) Number857938
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeHot Mix Asphalt HMA TypeType A HMA
HMA Grading3/4 inch Lot number
Sublot number HMA Mix NumberJMF2210P04

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2023-08-07-92-1AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Joe Mishoe and T. McCormick, CT D02 - Redding Northern Regional Laboratory08/11/2023Ward Jenkins
2023-08-07-92-2AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Sean McWhithey Colt Sweeny, CT D02 - Redding Northern Regional Laboratory08/08/2023Ward Jenkins
2023-08-07-92-3AASHTO T312-14: Preparing and Determining the Density of Asphalt Mixture Specimens by Means of the Superpave Gyratory Compactor (Method of Compaction)Josh Murphy and Colt Sweeny, CT D02 - Redding Northern Regional Laboratory08/09/2023Ward Jenkins
12/28/2023AASHTO T 312: %Gmm8=84.0, %Gmm85=92.6, %Gmm130=93.8; CT 366: S=44
2023-08-07-92-4AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Josh Murphy, CT D02 - Redding Northern Regional Laboratory08/10/2023Ward Jenkins
2023-08-07-92-5AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Josh Murphy, CT D02 - Redding Northern Regional Laboratory08/10/2023Ward Jenkins
12/28/2023AASHTO T 269: Pa=6.9%; MS-2: VMA=16.7%, VFA=58.4%, DP=1.1
2023-08-07-92-6AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)Colt Sweeny and Josh Murphy, CT D02 - Redding Northern Regional Laboratory08/17/2023Ward Jenkins
12/28/2023S1=115, S2=95, TSR=83%
2023-08-07-92-7CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix AsphaltDennis Hickey, CT D02 - Redding Northern Regional Laboratory08/22/2023Ward Jenkins
12/28/2023CT 389: Nf>15000, SIP>15000; CT 360: SA=0.1g/cm²

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments

DIME Test ID: 2023-08-07-92-1 AASHTO T308-10 (Verified)
DIME Test ID: 2023-08-07-92-2 AASHTO T209-12 (Verified)
DIME Test ID: 2023-08-07-92-3 AASHTO T312-14 (Verified)
DIME Test ID: 2023-08-07-92-4 AASHTO T275-07r12 (Verified)
DIME Test ID: 2023-08-07-92-5 AASHTO T269-14 (Verified)
DIME Test ID: 2023-08-07-92-6 AASHTO T283-14 (Verified)
DIME Test ID: 2023-08-07-92-7 CTM 389-19 (Verified)