Sample Record

Owner Lab

  • CT D02 - Redding Northern Regional Laboratory

DIME Sample ID 2023-07-13-84

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 993339
DEA: 024H9304
EFIS: 0219000027
DIST-CO-RTE-PM02-SHA-299-44.3/44.9
Award Date07/13/2022
Closeout Date04/11/2024
Work DescriptionINGOT CURVE IMPROVEMENT - CURVE IMROVEMENT
Location DescriptionIN SHASTA COUNTY NEAR INGOT FROM 2.7 MILES EAST OF SEAMANS GULCH ROAD TO 1.2 MILES WEST OF DU BOIS ROAD.
QA Service Level1 (Verified on 11/22/2021)

Sample Information

Sample Taken Date07/13/2023 Sample Unique Key84
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing07/14/2023
Sample typeProduction Start-Up A brief description of the sample16 boxes of Lime Treated 1/2-inch Type A HMA (eq. PG 64-28 M)
The quantity of what the sample constitutesProduction Start-Up Evaluation From where was the sample collectedManufacturer
First name of sampler or witnessed byCindy Last name of sampler or witnessed byBryant
Title of sampler Telephone number of sampler
Laboratory sample identificationD79299 Linked DIME Sample ID
The fabricator/manufacturer/facility nameTullis — Northstate Asphalt (Redding, CA) Transportation Laboratory (TL) Number858123
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeHot Mix Asphalt HMA TypeType A HMA
HMA Grading1/2 inch Lot number
Sublot number HMA Mix NumberJMF3513 2022 6

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2023-07-13-84-1AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Terry McCormick and Ward Jenkins, CT D02 - Redding Northern Regional Laboratory09/20/2023Ward Jenkins
Yes
12/05/2023Pb=4.98%
2023-07-13-84-2AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Colt Sweeny, CT D02 - Redding Northern Regional Laboratory07/17/2023Ward Jenkins
Yes
12/05/2023Gmm=2.509
2023-07-13-84-3AASHTO T312-14: Preparing and Determining the Density of Asphalt Mixture Specimens by Means of the Superpave Gyratory Compactor (Method of Compaction)Josh Murphy, CT D02 - Redding Northern Regional Laboratory07/25/2023Ward Jenkins
Yes
12/05/2023%Gmm8=86.3, %Gmm85=95.4, %Gmm130=96.7
2023-07-13-84-4AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Josh Murphy, CT D02 - Redding Northern Regional Laboratory07/26/2023Ward Jenkins
Yes
12/05/2023Gmb=2.402
2023-07-13-84-5AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Josh Murphy, CT D02 - Redding Northern Regional Laboratory07/26/2023Ward Jenkins
Yes
12/05/2023AASHTO T 269: Pa=4.3%; MS-2: VMA=13.3%, VFA=68.1%, DP=1.8
2023-07-13-84-6AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)Colt Sweeny, CT D02 - Redding Northern Regional Laboratory08/08/2023Ward Jenkins
Yes
12/05/2023S1=139, S2=133, TSR=96%
2023-07-13-84-7CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix AsphaltDennnis Hickey, CT D02 - Redding Northern Regional Laboratory08/07/2023Ward Jenkins
Yes
12/05/2023CT 389: Nf>15000, SIP>15000; CT 360: SA=0.1g/cm²

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2023-07-13-84-1 AASHTO T308-10 (Verified)
DIME Test ID: 2023-07-13-84-2 AASHTO T209-12 (Verified)
DIME Test ID: 2023-07-13-84-3 AASHTO T312-14 (Verified)
DIME Test ID: 2023-07-13-84-4 AASHTO T275-07r12 (Verified)
DIME Test ID: 2023-07-13-84-5 AASHTO T269-14 (Verified)
DIME Test ID: 2023-07-13-84-6 AASHTO T283-14 (Verified)
DIME Test ID: 2023-07-13-84-7 CTM 389-19 (Verified)