Owner Lab
- CT HQ - Sacramento Structural Materials Testing Laboratory
DIME Sample ID 2016-04-06-8
Sample is locked from editing. info
Project Information
| Project Identifiers | Project ID: 8196
DEA: 59912684 |
|---|
| DIST-CO-RTE-PM | 59--- |
|---|
| Award Date | Not set |
|---|
| Closeout Date | Not set |
|---|
| Work Description | |
|---|
| Location Description | |
|---|
| QA Service Level | NOT VERIFIED |
|---|
Sample Information
| Sample Taken Date | 04/06/2016 |
Sample Unique Key | 8 |
|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 04/07/2016 |
|---|
| Sample type | Quality Assurance |
A brief description of the sample | Joint Seal |
|---|
| The quantity of what the sample constitutes | 550ft |
From where was the sample collected | Source |
|---|
| First name of sampler or witnessed by | David |
Last name of sampler or witnessed by | Simon |
|---|
| Title of sampler | Unknown |
Telephone number of sampler | Unknown |
|---|
| Laboratory sample identification | Unknown |
Linked DIME Sample ID | Unknown |
|---|
| The fabricator/manufacturer/facility name | Watson Bowman |
Transportation Laboratory (TL) Number | Unknown |
|---|
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown |
Structure unique identifier | Not set |
|---|
| Structure name | Not set |
|---|
Material Information
| Material Type | SMTL TM2 - Type B Elastomeric Joint Seal |
Mfg. Lot Number(s) | 0616190 |
|---|
| Manufacturer(s) | Watson Bowman |
Temperature | 72 |
|---|
| Humidity | 50 |
Comments | Unknown |
|---|
| Joint Seal Size | 3.75in |
|---|
Submitted Tests
| DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
| 2016-04-06-8-1 | CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals | Brian | CT HQ - Sacramento Structural Materials Testing Laboratory | 04/11/2016 | Brian | Yes | 04/20/2016 | |
|
| 2016-04-06-8-2 | ASTM D2240-05re10: Standard Test Method for Rubber Property - Durometer Hardness | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 04/13/2016 | Brian Ewing | Yes | 04/20/2016 | |
|
| 2016-04-06-8-3 | ASTM D412-06a-re13: Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension | Brian | CT HQ - Sacramento Structural Materials Testing Laboratory | 04/13/2016 | Brian | Yes | 04/20/2016 | |
|
| 2016-04-06-8-4 | ASTM D2628-91-re11-low: Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements (Low Temp Recovery) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 04/13/2016 | Brian Ewing | Yes | 04/20/2016 | |
|
| 2016-04-06-8-5 | ASTM D2628-91-re11-high: Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements (High Temp Recovery) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 04/13/2016 | Brian Ewing | Yes | 04/20/2016 | |
|
| 2016-04-06-8-6 | ASTM D471-15a: Standard Test Method for Rubber Property - Effect of Liquids | Glen Weldon | CT HQ - Sacramento Structural Materials Testing Laboratory | 04/19/2016 | Glen Weldon | Yes | 04/20/2016 | |
|
| 2016-04-06-8-7 | SMTL BILST-06: (Neoprene Verification) Bilstein Test | Glen Weldon | CT HQ - Sacramento Structural Materials Testing Laboratory | 04/19/2016 | Glen Weldon | Yes | 04/20/2016 | |
|
14896149211492214923149241500915010
