Sample Record
Owner Lab
- CT D08 - Fontana Southern Regional Laboratory
DIME Sample ID 2016-01-11-6
Project Information
Project Identifiers | Project ID: 209141 DEA: 07215954 EFIS: 0700001835 |
---|---|
DIST-CO-RTE-PM | 07-LA-5-0.0/7.6 |
Award Date | 04/24/2014 |
Closeout Date | 07/14/2022 |
Work Description | WIDENING FREEWAY AND RECONSTRUCT OVERHEAD AND OVERCROSSING STRUCTURES |
Location Description | LOS ANGELES COUNTY IN LA MIRADA, SANTA FE SPRINGS, NORWALK AND DOWNEY FROM ORANGE COUNTY/LOS ANGELES COUNTY LIMIT LINES TO 0.7 MILE NORTH OF ROUTE 605 |
QA Service Level | 1 (Verified on 06/02/2014) |
Sample Information
Sample Taken Date | 01/11/2016 | Sample Unique Key | 6 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 01/26/2016 |
Sample type | Annual Source Testing | A brief description of the sample | Three eighths inch PCC Aggregates |
The quantity of what the sample constitutes | 6 Bags | From where was the sample collected | Source |
First name of sampler or witnessed by | Bong | Last name of sampler or witnessed by | Limos |
Title of sampler | QA Technician | Telephone number of sampler | Unknown |
Laboratory sample identification | 6022B | Linked DIME Sample ID | Unknown |
The fabricator/manufacturer/facility name | Vulcan San Bernardino | Transportation Laboratory (TL) Number | C-16-96 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown | Structure unique identifier | Not set |
Structure name | Not set |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | SMARA 91 36 0012 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | Unknown | The fabricator/manufacturer designation for the sample | Unknown |
The plant number | Unknown | A detailed description of where the material sample was collected | Stockpiles |
Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 3/8 inch |
The concrete mix design number | Lot number | Not set | |
Sublot number | Not set | Aggregate Mix Number | Not set |
Submitted Tests
DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
---|---|---|---|---|---|---|---|---|
2016-01-11-6-1 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | MD Shahjahan, CT D08 - Fontana Southern Regional Laboratory | 01/30/2016 | Charles Mcdonald | No | Info | ||
2016-01-11-6-2 | CTM 206-October 2011: Method of Test for Specific Gravity and Absorption of Coarse Aggregate | Nader Rashidi, CT D08 - Fontana Southern Regional Laboratory | 02/02/2016 | Charles Mcdonald | No | Info | ||
2016-01-11-6-3 | CTM 211-May 2010: Abrasion of Coarse Aggregate by Use of the Los Angeles Abrasion Testing Machine | Nader Rashidi, CT D08 - Fontana Southern Regional Laboratory | 02/01/2016 | Charles Mcdonald | No | Info | ||
2016-01-11-6-4 | CTM 214-August 2010: Method of Test for Soundness of Aggregates by Use of Sodium Sulfate | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 02/10/2016 | Charles Mcdonald | No | Info | ||
2016-01-11-6-5 | CTM 227-June 2012: Method of Test for Evaluating Cleanness of Coarse Aggregate (Cleanness) | MD Shahjahan, CT D08 - Fontana Southern Regional Laboratory | 01/28/2016 | Charles Mcdonald | No | Info |
Sample File Attachments
File Name | Extension | Date Uploaded | Actions |
---|---|---|---|
No results found. |
Test File Attachments
DIME Test ID: 2016-01-11-6-1 CTM 202-November 2011
DIME Test ID: 2016-01-11-6-2 CTM 206-October 2011
DIME Test ID: 2016-01-11-6-3 CTM 211-May 2010
DIME Test ID: 2016-01-11-6-4 CTM 214-August 2010
DIME Test ID: 2016-01-11-6-5 CTM 227-June 2012