Sample Record
Owner Lab
- CT D08 - Fontana Southern Regional Laboratory
DIME Sample ID 2016-01-11-3
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 209141 DEA: 07215954 EFIS: 0700001835 |
|---|---|
| DIST-CO-RTE-PM | 07-LA-5-0.0/7.6 |
| Award Date | 04/24/2014 |
| Closeout Date | 07/14/2022 |
| Work Description | WIDENING FREEWAY AND RECONSTRUCT OVERHEAD AND OVERCROSSING STRUCTURES |
| Location Description | LOS ANGELES COUNTY IN LA MIRADA, SANTA FE SPRINGS, NORWALK AND DOWNEY FROM ORANGE COUNTY/LOS ANGELES COUNTY LIMIT LINES TO 0.7 MILE NORTH OF ROUTE 605 |
| QA Service Level | 1 (Verified on 06/02/2014) |
Sample Information
| Sample Taken Date | 01/11/2016 | Sample Unique Key | 3 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 01/26/2016 |
| Sample type | Annual Source Testing | A brief description of the sample | One inch PCC Aggregates |
| The quantity of what the sample constitutes | 8 Bags | From where was the sample collected | Source |
| First name of sampler or witnessed by | Bong | Last name of sampler or witnessed by | Limos |
| Title of sampler | QA Technician | Telephone number of sampler | Unknown |
| Laboratory sample identification | 6020B | Linked DIME Sample ID | Unknown |
| The fabricator/manufacturer/facility name | Vulcan San Bernardino | Transportation Laboratory (TL) Number | C-16-94 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown | Structure unique identifier | Not set |
| Structure name | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | SMARA 91 36 0012 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | Unknown | The fabricator/manufacturer designation for the sample | Unknown |
| The plant number | Unknown | A detailed description of where the material sample was collected | Stockpiles |
| Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 1 inch |
| The concrete mix design number | Lot number | Not set | |
| Sublot number | Not set | Aggregate Mix Number | Not set |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
|---|---|---|---|---|---|---|---|---|
| 2016-01-11-3-1 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | MD Shahjahan, CT D08 - Fontana Southern Regional Laboratory | 01/30/2016 | Charles Mcdonald | No | Info | ||
| 2016-01-11-3-2 | CTM 206-October 2011: Method of Test for Specific Gravity and Absorption of Coarse Aggregate | Nader Rashidi, CT D08 - Fontana Southern Regional Laboratory | 02/02/2016 | Charles Mcdonald | No | Info | ||
| 2016-01-11-3-3 | CTM 211-May 2010: Abrasion of Coarse Aggregate by Use of the Los Angeles Abrasion Testing Machine | Nader Rashidi, CT D08 - Fontana Southern Regional Laboratory | 02/01/2016 | Charles Mcdonald | No | Info | ||
| 2016-01-11-3-4 | CTM 214-August 2010: Method of Test for Soundness of Aggregates by Use of Sodium Sulfate | MD Shahjahan, CT D08 - Fontana Southern Regional Laboratory | 02/27/2016 | Charles Mcdonald | No | Info | ||
| 2016-01-11-3-5 | CTM 227-June 2012: Method of Test for Evaluating Cleanness of Coarse Aggregate (Cleanness) | MD Shahjahan, CT D08 - Fontana Southern Regional Laboratory | 01/28/2016 | Charles Mcdonald | No | Info |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2016-01-11-3-1 CTM 202-November 2011
DIME Test ID: 2016-01-11-3-2 CTM 206-October 2011
DIME Test ID: 2016-01-11-3-3 CTM 211-May 2010
DIME Test ID: 2016-01-11-3-4 CTM 214-August 2010
DIME Test ID: 2016-01-11-3-5 CTM 227-June 2012