Sample Record
Owner Lab
- CT D08 - Fontana Southern Regional Laboratory
DIME Sample ID 2023-08-02-46
Project Information
Project Identifiers | Project ID: 214486 DEA: 080K1224 EFIS: 0815000244 |
---|---|
DIST-CO-RTE-PM | 08-SBD-15-R28.6/37.5 |
Award Date | Not set |
Closeout Date | Not set |
Work Description | REHBILIATATE EXISTING MAINLINE AND RAMP PAVEMENT |
Location Description | SAN BERNARDINO COUNTY IN HESPERIA AND VICTORVILLE FROM OAK HILL ROAD OVERCROSSING TO 0.1 MILE SOUTH OF BEAR VALLEY ROAD OVERCROSSING |
QA Service Level | 1 (Verified on 06/23/2021) |
Sample Information
Sample Taken Date | 08/02/2023 | Sample Unique Key | 46 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 08/03/2023 |
Sample type | Verification | A brief description of the sample | JMF 3/4" HMA-A-SP R25, 1.0% LSM |
The quantity of what the sample constitutes | 3 Bags Of Comb. Agg., 11 Bags Of Bin Agg., 2 Bags Rap | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Robert | Last name of sampler or witnessed by | QC |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 0398A-23 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Blue Diamond-Victorville | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-36-0046, 91-36-0022 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Belt Cut at Blue Diamond Victorville Plant | |
Where the material sample would have been placed if not sampled | Asphalt Paving | Primary Aggregate Nominal Size | 3/4 inch |
The concrete mix design number | 300154 R25 LSM | Lot number | |
Sublot number | Aggregate Mix Number |
Submitted Tests
DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
---|---|---|---|---|---|---|---|---|
2023-08-02-46-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Satish Jain/David Padilla/Ali Rehman, CT D08 - Fontana Southern Regional Laboratory | 08/11/2023 | Satish Jain | Yes | 10/05/2023 | Combined L.T. Aggregate Gradation | |
2023-08-02-46-2 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Friday Ofoegbu, CT D08 - Fontana Southern Regional Laboratory | 08/05/2023 | Satish Jain | Yes | 10/05/2023 | ||
2023-08-02-46-3 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | Larry Diaz, CT D08 - Fontana Southern Regional Laboratory | 08/05/2023 | Satish Jain | Yes | 10/05/2023 | ||
2023-08-02-46-4 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | ali rehman, CT D08 - Fontana Southern Regional Laboratory | 08/08/2023 | Satish Jain | Yes | 10/05/2023 | ||
2023-08-02-46-5 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | R .G., CT D08 - Fontana Southern Regional Laboratory | 08/14/2023 | Satish Jain | Yes | 10/05/2023 | ||
2023-08-02-46-6 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 08/05/2023 | Satish Jain | Yes | 10/05/2023 | The FAA is below 45 | |
2023-08-02-46-7 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 08/05/2023 | Satish Jain | Yes | 10/05/2023 | ||
2023-08-02-46-8 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 08/05/2023 | Satish Jain | Yes | 10/05/2023 | ||
2023-08-02-46-9 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | R.G, CT D08 - Fontana Southern Regional Laboratory | 08/14/2023 | Satish Jain | Yes | 10/05/2023 | Rap Gradation After Ignition | |
2023-08-02-46-10 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Satish Jain/David Padilla/Ali Rehman, CT D08 - Fontana Southern Regional Laboratory | 08/15/2023 | Satish Jain | No | Comb. L.T. Aggregate Gradation W/Rap Gradation Correlation Factors | Info |
Sample File Attachments
File Name | Extension | Date Uploaded | Actions |
---|---|---|---|
No results found. |
Test File Attachments
DIME Test ID: 2023-08-02-46-1 AASHTO T27-14 (Verified)
DIME Test ID: 2023-08-02-46-2 AASHTO T84-14 (Verified)
DIME Test ID: 2023-08-02-46-3 AASHTO T85-13 (Verified)
DIME Test ID: 2023-08-02-46-4 AASHTO T96-02r10 (Verified)
DIME Test ID: 2023-08-02-46-5 AASHTO T176-08 (Verified)
DIME Test ID: 2023-08-02-46-6 AASHTO T304-11 (Verified)
DIME Test ID: 2023-08-02-46-7 AASHTO T335-09r13 (Verified)
DIME Test ID: 2023-08-02-46-8 ASTM D4791-10 (Verified)
DIME Test ID: 2023-08-02-46-9 CTM 202-November 2011 (Verified)
DIME Test ID: 2023-08-02-46-10 CTM 202-November 2011