DIME - Sample Record for DIME Sample ID 2023-05-31-63

DIME » All Projects » Project - DEA: 08323034 » Sample 2023-05-31-63 » Sample Details

Sample Record

Owner Lab

CT D08 - Fontana Southern Regional Laboratory

DIME Sample ID 2023-05-31-63

Project Information

Project Identifiers	Project ID: 993159 DEA: 08323034 EFIS: 0812000059 COOP: 081703
DIST-CO-RTE-PM	08-RIV-60-18.8/19.6
Award Date	05/04/2021
Closeout Date	Not set
Work Description	Project Phase 2 (project) proposes to replace the existing hook ramp configuration along westbound (WB) SR-60 at the SR- 60/Moreno Beach Drive interchange with a partial cloverleaf configuration
Location Description	SR-60 & Moreno Beach Interchange
QA Service Level	2 (Verified on 07/27/2021)

Sample Information

Sample Taken Date	05/31/2023	Sample Unique Key	63
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	06/16/2023
Sample type	Verification	A brief description of the sample	JMF 3/4" RHMA-G-SP 0.5% LAS
The quantity of what the sample constitutes	4 Bags Of Agg, 1 Bag each of Scrap & Hi-Nat	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Victor	Last name of sampler or witnessed by	QC
Title of sampler		Telephone number of sampler
Laboratory sample identification	0322G-23	Linked DIME Sample ID
The fabricator/manufacturer/facility name	All American Asphalt- Perris	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Information

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-33-0005
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Belt Cut at All American Perris
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number	106835	Lot number
Sublot number		Aggregate Mix Number

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2023-05-31-63-1	AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)	Satish Jain/M. Campos, CT D08 - Fontana Southern Regional Laboratory	06/25/2023	Satish Jain	Yes	09/12/2023	Combined Virgin Aggregate Gradation
2023-05-31-63-2	AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)	Friday Ofoegbu, CT D08 - Fontana Southern Regional Laboratory	06/22/2023	Satish Jain	Yes	09/12/2023
2023-05-31-63-3	AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)	Larry Diaz, CT D08 - Fontana Southern Regional Laboratory	06/22/2023	Satish Jain	Yes	09/12/2023
2023-05-31-63-4	AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)	Ali Rehman, CT D08 - Fontana Southern Regional Laboratory	06/23/2023	Satish Jain	Yes	09/12/2023
2023-05-31-63-5	AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)	M.Landaverde, CT D08 - Fontana Southern Regional Laboratory	06/28/2023	Satish Jain	Yes	09/12/2023
2023-05-31-63-6	AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)	Satish Jain, CT D08 - Fontana Southern Regional Laboratory	06/27/2023	Satish Jain	Yes	09/12/2023
2023-05-31-63-7	AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)	Satish Jain, CT D08 - Fontana Southern Regional Laboratory	06/27/2023	Satish Jain	Yes	09/12/2023
2023-05-31-63-8	ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)	Satish Jain, CT D08 - Fontana Southern Regional Laboratory	06/27/2023	Satish Jain	Yes	09/12/2023

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2023-05-31-63-1 AASHTO T27-14 (Verified)
DIME Test ID: 2023-05-31-63-2 AASHTO T84-14 (Verified)
DIME Test ID: 2023-05-31-63-3 AASHTO T85-13 (Verified)
DIME Test ID: 2023-05-31-63-4 AASHTO T96-02r10 (Verified)
DIME Test ID: 2023-05-31-63-5 AASHTO T176-08 (Verified)
DIME Test ID: 2023-05-31-63-6 AASHTO T304-11 (Verified)
DIME Test ID: 2023-05-31-63-7 AASHTO T335-09r13 (Verified)
DIME Test ID: 2023-05-31-63-8 ASTM D4791-10 (Verified)