Sample Record

Owner Lab

  • Valero Benicia Refinery

DIME Sample ID 2023-04-06-54

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 44444
DEA: ASCP
EFIS: ASCP
DIST-CO-RTE-PM59---
Award DateNot set
Closeout DateNot set
Work DescriptionSpecial project for submitting Sample information for Asphalt Supplier Certification Program.
Location DescriptionNot set
QA Service LevelNOT VERIFIED

Sample Information

Sample Taken Date04/06/2023 Sample Unique Key54
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing04/06/2023
Sample typeVerification A brief description of the sampleTank 507
The quantity of what the sample constitutes1 of 1 From where was the sample collectedManufacturer
First name of sampler or witnessed bySeverino Last name of sampler or witnessed byGorospe
Title of samplerNot set Telephone number of samplerNot set
Laboratory sample identification1230401241 Linked DIME Sample IDNot set
The fabricator/manufacturer/facility nameBenicia, CA Transportation Laboratory (TL) NumberNot set
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeAsphalt Binder Performance GradePG 58-34M
ModifiedNot set Lot numberNot set
Sublot numberNot set Tank numberNot set
Time of sampleNot set HMA SupplierNot set
Certified Asphalt SupplierValero Benicia Refinery MultigradeNot set
Multigrade TypeNot set Asphalt Binder Mix NumberNot set

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2023-04-06-54-1AASHTO T316-17: Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational ViscometerMehmood, U., Valero Benicia Refinery05/15/2023Severino Gorospe
Yes
05/15/2023Submitted from ASCP bulk upload.
2023-04-06-54-2AASHTO T48-18: Standard Method of Test for Flash Point of Asphalt Binder by Cleveland Open CupMehmood, U., Valero Benicia Refinery05/15/2023Severino Gorospe
Yes
05/15/2023Submitted from ASCP bulk upload.
2023-04-06-54-3AASHTO T301-22: Standard Method of Test for Elastic Recovery Test of Asphalt Materials by Means of a DuctilometerMehmood, U., Valero Benicia Refinery05/15/2023Severino Gorospe
Yes
05/15/2023Submitted from ASCP bulk upload.
2023-04-06-54-4AASHTO T315-22: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)Mehmood, U., Valero Benicia Refinery05/15/2023Severino Gorospe
Yes
05/15/2023Submitted from ASCP bulk upload.
2023-04-06-54-5AASHTO T240-17: Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test)Mehmood, U., Valero Benicia Refinery05/15/2023Severino Gorospe
Yes
05/15/2023Submitted from ASCP bulk upload.
2023-04-06-54-6AASHTO T315-22: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)Mehmood, U., Valero Benicia Refinery05/15/2023Severino Gorospe
Yes
05/15/2023Submitted from ASCP bulk upload.
2023-04-06-54-7AASHTO T315-22: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)Mehmood, U., Valero Benicia Refinery05/15/2023Severino Gorospe
Yes
05/15/2023Submitted from ASCP bulk upload.
2023-04-06-54-8AASHTO T315-22: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)Mehmood, U., Valero Benicia Refinery05/15/2023Severino Gorospe
Yes
05/15/2023Submitted from ASCP bulk upload.
2023-04-06-54-9AASHTO T313-22: Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)Mehmood, U., Valero Benicia Refinery05/15/2023Severino Gorospe
Yes
05/15/2023Submitted from ASCP bulk upload.
2023-04-06-54-10AASHTO T313-22: Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)Mehmood, U., Valero Benicia Refinery05/15/2023Severino Gorospe
Yes
05/15/2023Submitted from ASCP bulk upload.

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2023-04-06-54-1 AASHTO T316-17 (Verified)
DIME Test ID: 2023-04-06-54-2 AASHTO T48-18 (Verified)
DIME Test ID: 2023-04-06-54-3 AASHTO T301-22 (Verified)
DIME Test ID: 2023-04-06-54-4 AASHTO T315-22 (Verified)
DIME Test ID: 2023-04-06-54-5 AASHTO T240-17 (Verified)
DIME Test ID: 2023-04-06-54-6 AASHTO T315-22 (Verified)
DIME Test ID: 2023-04-06-54-7 AASHTO T315-22 (Verified)
DIME Test ID: 2023-04-06-54-8 AASHTO T315-22 (Verified)
DIME Test ID: 2023-04-06-54-9 AASHTO T313-22 (Verified)
DIME Test ID: 2023-04-06-54-10 AASHTO T313-22 (Verified)