Sample Record
Owner Lab
- CT D08 - Fontana Southern Regional Laboratory
DIME Sample ID 2015-04-23-13
Project Information
Project Identifiers | Project ID: 209141 DEA: 07215954 EFIS: 0700001835 |
---|---|
DIST-CO-RTE-PM | 07-LA-5-0.0/7.6 |
Award Date | 04/24/2014 |
Closeout Date | 07/14/2022 |
Work Description | WIDENING FREEWAY AND RECONSTRUCT OVERHEAD AND OVERCROSSING STRUCTURES |
Location Description | LOS ANGELES COUNTY IN LA MIRADA, SANTA FE SPRINGS, NORWALK AND DOWNEY FROM ORANGE COUNTY/LOS ANGELES COUNTY LIMIT LINES TO 0.7 MILE NORTH OF ROUTE 605 |
QA Service Level | 1 (Verified on 06/02/2014) |
Sample Information
Sample Taken Date | 04/23/2015 | Sample Unique Key | 13 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 04/27/2015 |
Sample type | Department Acceptance | A brief description of the sample | Class 4 Aggregate Subbase |
The quantity of what the sample constitutes | 2 Bags | From where was the sample collected | Source |
First name of sampler or witnessed by | Javier | Last name of sampler or witnessed by | Guzman |
Title of sampler | Construction Inspector | Telephone number of sampler | Unknown |
Laboratory sample identification | 5063B | Linked DIME Sample ID | Unknown |
The fabricator/manufacturer/facility name | San Antonio Crushing Yard | Transportation Laboratory (TL) Number | C661855 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown | Structure unique identifier | Not set |
Structure name | Not set |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | Unknown |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | Unknown | The fabricator/manufacturer designation for the sample | Unknown |
The plant number | Unknown | A detailed description of where the material sample was collected | Stockpile at San Antonio Crushing Yard |
Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | |
The concrete mix design number | Lot number | Not set | |
Sublot number | Not set | Aggregate Mix Number | Not set |
Submitted Tests
DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
---|---|---|---|---|---|---|---|---|
2015-04-23-13-1 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Martin Ruiz, CT D08 - Fontana Southern Regional Laboratory | 04/29/2015 | Charles Mcdonald | No | Info | ||
2015-04-23-13-2 | CTM 217-June 2011: Method of Test for Sand Equivalent | Babak Rezaie, CT D08 - Fontana Southern Regional Laboratory | 04/30/2015 | Charles Mcdonald | No | Info | ||
2015-04-23-13-3 | CTM 229-June 2011: Method of Test for Durability Index | Babak Rezaie, CT D08 - Fontana Southern Regional Laboratory | 04/30/2015 | Charles Mcdonald | No | Info | ||
2015-04-23-13-4 | CTM 301-March 2000: Method for Determining the Resistance "R" Value of Treated and Untreated Bases, Subbases, and Basement Soils by the Stabilometer | Vincent Onoh, CT D08 - Fontana Southern Regional Laboratory | 05/04/2015 | Charles Mcdonald | No | Info |
Sample File Attachments
File Name | Extension | Date Uploaded | Actions |
---|---|---|---|
No results found. |
Test File Attachments
DIME Test ID: 2015-04-23-13-1 CTM 202-November 2011
DIME Test ID: 2015-04-23-13-2 CTM 217-June 2011
DIME Test ID: 2015-04-23-13-3 CTM 229-June 2011
DIME Test ID: 2015-04-23-13-4 CTM 301-March 2000