Sample Record

Owner Lab

  • CT HQ - QASI Sacramento Field Office

DIME Sample ID 2023-05-02-8

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 214951
DEA: 120K0234
EFIS: 1214000100
DIST-CO-RTE-PM12-ORA-5-17.1/18.9
Award Date09/23/2020
Closeout DateNot set
Work DescriptionSouth County Improvement Project (Phase 3 - El Toro/Alicia) WIDEN FREEWAY AND BRIDGES, RECONSTRUCT BRIDGE AND WALLS.
Location DescriptionORANGE COUNTY IN MISSION VIEJO, LAGUNA HILLS, LAGUNA WOODS AND LAKE FOREST FROM 0.4 MILE SOUTH OF ALICIA PARKWAY OVERCROSSING TO 0.2 MILE NORTH OF EL TORO ROAD UNDERCROSSING
QA Service Level1 (Verified on 10/01/2020)

Sample Information

Sample Taken Date05/02/2023 Sample Unique Key8
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing05/09/2023
Sample typeQuality Assurance A brief description of the sampleA325 Bolts
The quantity of what the sample constitutes750 From where was the sample collectedDistributor
First name of sampler or witnessed byEdward Last name of sampler or witnessed byLeach
Title of sampler Telephone number of sampler7072903887
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameSt. Louis Bolt Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeSMTL TM3 - Fastener Assembly Rocap Number(s)
Heat Number(s)10805150 Nut Mfg. Lot Number(s)E214I1
Washer Mfg. Lot Number(s)227697 Bolt SpecificationA325
Bolt Length(s)2 Nut SpecificationA563
Washer SpecificationF436 FinishMech Galv
Diameter/Size1/2(13) Bolt Mfg. Lot NumberM5575
Rocap Test Requirement(s) Lubricant Requirements(s)

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2023-05-02-8-1ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)<None>, CT HQ - Sacramento Structural Materials Testing Laboratory05/17/2023<None>
Yes
05/26/2023Nut Proof Load
2023-05-02-8-2ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)<None>, CT HQ - Sacramento Structural Materials Testing Laboratory05/17/2023<None>
Yes
05/26/2023Nut Proof Load
2023-05-02-8-3ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory05/19/2023Andrew Auvinen
Yes
05/26/2023
2023-05-02-8-4ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory05/19/2023Andrew Auvinen
Yes
05/26/2023
2023-05-02-8-5ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory05/19/2023Andrew Auvinen
Yes
05/26/2023
2023-05-02-8-6ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory05/19/2023Andrew Auvinen
Yes
05/26/2023
2023-05-02-8-7ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory05/19/2023Andrew Auvinen
Yes
05/26/2023
2023-05-02-8-8ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory05/19/2023Andrew Auvinen
Yes
05/26/2023
2023-05-02-8-9ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory05/19/2023Andrew Auvinen
Yes
05/26/2023
2023-05-02-8-10ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory05/19/2023Andrew Auvinen
Yes
05/26/2023

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2023-05-02-8-1 ASTM F606-21 (Verified)
DIME Test ID: 2023-05-02-8-2 ASTM F606-21 (Verified)
DIME Test ID: 2023-05-02-8-3 ASME B1.2-83r17 (Verified)
DIME Test ID: 2023-05-02-8-4 ASME B1.2-83r17 (Verified)
DIME Test ID: 2023-05-02-8-5 ASME B1.2-83r17 (Verified)
DIME Test ID: 2023-05-02-8-6 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-05-02-8-7 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-05-02-8-8 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-05-02-8-9 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-05-02-8-10 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-05-02-8-11 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-05-02-8-12 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-05-02-8-13 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-05-02-8-14 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-05-02-8-15 ASTM E18-20 (Verified)
DIME Test ID: 2023-05-02-8-16 ASTM E18-20 (Verified)
DIME Test ID: 2023-05-02-8-17 ASTM E18-20 (Verified)
DIME Test ID: 2023-05-02-8-18 ASTM E18-20 (Verified)
DIME Test ID: 2023-05-02-8-19 ASTM E18-20 (Verified)
DIME Test ID: 2023-05-02-8-20 ASTM E18-20 (Verified)