Sample Record

Owner Lab

  • CT D08 - Fontana Southern Regional Laboratory

DIME Sample ID 2023-03-25-20

Project Information

Project IdentifiersProject ID: 994426
DEA: 081F9804
EFIS: 0815000087
DIST-CO-RTE-PM08-RIV-215-17.5
Award Date01/03/2023
Closeout DateNot set
Work DescriptionI-215/Holland Road New BR OC (SOP)
Location DescriptionCity of Menifee
QA Service Level2 (Verified on 12/07/2022)

Sample Information

Sample Taken Date03/25/2023 Sample Unique Key20
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing04/14/2023
Sample typeVerification A brief description of the sampleJMF 1/2" HMA-A-SP R15 0.25% LAS
The quantity of what the sample constitutes4 Bags Of Agg., 3 Bags Of Rap From where was the sample collectedManufacturer
First name of sampler or witnessed byVulcan Last name of sampler or witnessed byQC
Title of sampler Telephone number of sampler
Laboratory sample identification0205A-23 Linked DIME Sample ID
The fabricator/manufacturer/facility nameVulcan Materials Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-33-0027, 91-33-073
The fabricator's/manufacturer's product name for the sample The fabricator/manufacturer designation for the sample
The plant number A detailed description of where the material sample was collectedBelt Cut at Vulcan Materials- Corona
Where the material sample would have been placed if not sampledAsphalt Paving Primary Aggregate Nominal Size1/2 inch
The concrete mix design number324108 CORD SJR Lot number
Sublot number Aggregate Mix Number

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2023-03-25-20-1AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)Satish Jain/RG, CT D08 - Fontana Southern Regional Laboratory04/20/2023Satish Jain
Yes
08/02/2023Combined Virgin Aggregate Gradation
2023-03-25-20-2AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)Friday Ofoegbu, CT D08 - Fontana Southern Regional Laboratory04/18/2023Satish Jain
Yes
08/02/2023
2023-03-25-20-3AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)Friday Ofoegbu, CT D08 - Fontana Southern Regional Laboratory04/18/2023Satish Jain
Yes
08/02/2023
2023-03-25-20-4AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)Seige M, CT D08 - Fontana Southern Regional Laboratory04/24/2023Satish Jain
Yes
08/02/2023
2023-03-25-20-5AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)Larry Diaz, CT D08 - Fontana Southern Regional Laboratory04/25/2023Satish Jain
Yes
08/02/2023
2023-03-25-20-6AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)Satish Jain, CT D08 - Fontana Southern Regional Laboratory04/26/2023Satish Jain
Yes
08/02/2023
2023-03-25-20-7AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)Satish Jain, CT D08 - Fontana Southern Regional Laboratory04/26/2023Satish Jain
Yes
08/02/2023
2023-03-25-20-8ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)Satish Jain, CT D08 - Fontana Southern Regional Laboratory04/26/2023Satish Jain
Yes
08/02/2023
2023-03-25-20-9CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse AggregatesSatish Jain, CT D08 - Fontana Southern Regional Laboratory04/26/2023Satish Jain
Yes
08/02/2023Rap Gradation After Ignition
2023-03-25-20-10CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse AggregatesSatish Jain/RG, CT D08 - Fontana Southern Regional Laboratory04/26/2023Satish Jain
No
Comb. Agg. Gradation W/Rap Gradation Correlation Factors Info

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2023-03-25-20-1 AASHTO T27-14 (Verified)
DIME Test ID: 2023-03-25-20-2 AASHTO T84-14 (Verified)
DIME Test ID: 2023-03-25-20-3 AASHTO T85-13 (Verified)
DIME Test ID: 2023-03-25-20-4 AASHTO T96-02r10 (Verified)
DIME Test ID: 2023-03-25-20-5 AASHTO T176-08 (Verified)
DIME Test ID: 2023-03-25-20-6 AASHTO T304-11 (Verified)
DIME Test ID: 2023-03-25-20-7 AASHTO T335-09r13 (Verified)
DIME Test ID: 2023-03-25-20-8 ASTM D4791-10 (Verified)
DIME Test ID: 2023-03-25-20-9 CTM 202-November 2011 (Verified)
DIME Test ID: 2023-03-25-20-10 CTM 202-November 2011