Sample Record

Owner Lab

  • CT HQ - QASI Los Angeles Field Office

DIME Sample ID 2023-03-17-1

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 215220
DEA: 07210624
EFIS: 0719000068
DIST-CO-RTE-PM07-LA,SBD-71-1.8/R4.7&R0.0/R0.2
Award Date02/05/2021
Closeout DateNot set
Work DescriptionPLACE STRUCTURE CONCRETE RETAINING WALLS & BOX CULVERT AND PLACE JPCP.
Location DescriptionIN LOS ANGELES AND SAN BERNARDINO COUNTIES IN POMONA AND CHINO HILLS FROM 0.2 MILE SOUTH OF MISSION BOULEVARD OVERCROSSING TO 0.2 MILE OF SAN BERNARDINO COUNTY LINE.
QA Service Level1 (Verified on 03/24/2021)

Sample Information

Sample Taken Date03/17/2023 Sample Unique Key1
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing03/22/2023
Sample typeQuality Assurance A brief description of the sample7/8 fastener assemblies
The quantity of what the sample constitutes16 pcs From where was the sample collectedDistributor
First name of sampler or witnessed byMike Last name of sampler or witnessed byFoerder
Title of sampler Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility namePortland Bolt Manufacturing Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeSMTL TM3 - Fastener Assembly Rocap Number(s)
Heat Number(s)79003341, 100109179, 212958, 7011, 32028550 Nut Mfg. Lot Number(s)35978-212958 7011
Washer Mfg. Lot Number(s)167117 Bolt SpecificationASTM A449
Bolt Length(s) Nut SpecificationASTM A563
Washer SpecificationASTM F436-11 FinishASTM F2329
Diameter/Size7/8 Bolt Mfg. Lot Number
Rocap Test Requirement(s) Lubricant Requirements(s)

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2023-03-17-1-1ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)rmacias, CT HQ - Sacramento Structural Materials Testing Laboratory03/28/2023rmacias
Yes
03/29/2023A449 Wedge Tensile
2023-03-17-1-2ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)rmacias, CT HQ - Sacramento Structural Materials Testing Laboratory03/28/2023rmacias
Yes
03/29/2023A449 Wedge Tensile All Thread
2023-03-17-1-3ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)<None>, CT HQ - Sacramento Structural Materials Testing Laboratory03/28/2023<None>
Yes
03/29/2023A563 Nut Proof
2023-03-17-1-4ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory03/28/2023Andrew Auvinen
Yes
03/29/2023
2023-03-17-1-5ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory03/28/2023Andrew Auvinen
Yes
03/29/2023
2023-03-17-1-6ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory03/28/2023Andrew Auvinen
Yes
03/29/2023
2023-03-17-1-7ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory03/28/2023Andrew Auvinen
Yes
03/29/2023
2023-03-17-1-8ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory03/28/2023Andrew Auvinen
Yes
03/29/2023
2023-03-17-1-9ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory03/28/2023Andrew Auvinen
Yes
03/29/2023
2023-03-17-1-10ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory03/28/2023Andrew Auvinen
Yes
03/29/2023

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2023-03-17-1-1 ASTM F606-21 (Verified)
DIME Test ID: 2023-03-17-1-2 ASTM F606-21 (Verified)
DIME Test ID: 2023-03-17-1-3 ASTM F606-21 (Verified)
DIME Test ID: 2023-03-17-1-4 ASME B1.2-83r17 (Verified)
DIME Test ID: 2023-03-17-1-5 ASME B1.2-83r17 (Verified)
DIME Test ID: 2023-03-17-1-6 ASME B1.2-83r17 (Verified)
DIME Test ID: 2023-03-17-1-7 ASME B1.2-83r17 (Verified)
DIME Test ID: 2023-03-17-1-8 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-03-17-1-9 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-03-17-1-10 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-03-17-1-11 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-03-17-1-12 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-03-17-1-13 ASTM E18-20 (Verified)
DIME Test ID: 2023-03-17-1-14 ASTM E18-20 (Verified)