Sample Record
Owner Lab
- CT D08 - Fontana Southern Regional Laboratory
DIME Sample ID 2015-05-13-9
Project Information
Project Identifiers | Project ID: 3825 DEA: 07138204 EFIS: 0700000142 |
---|---|
DIST-CO-RTE-PM | 07-LA-47,103-3.5/4.6,0.0/1.1 |
Award Date | 06/30/2011 |
Closeout Date | 07/14/2022 |
Work Description | REPLACE STEEL BRIDGE WITH CIP PS CONCRETE BOX GIRDER BRIDGE AND RAMPS. |
Location Description | LOS ANGELES COUNTY IN LONG BEACH AND LOS ANGELES ON ROUTE 47 FROM OCEAN BOULEVARD TO ROUTE 103 JUNCTION AND ON ROUTE 103 FROM ROUTE 47 JUNCTION TO ANAHEIM STREET OVERHEAD |
QA Service Level | 1 (Verified on 03/29/2012) |
Sample Information
Sample Taken Date | 05/13/2015 | Sample Unique Key | 9 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/14/2015 |
Sample type | Annual Source Testing | A brief description of the sample | One and a half inch PCC Aggregates |
The quantity of what the sample constitutes | 4 Bags | From where was the sample collected | Source |
First name of sampler or witnessed by | Tom | Last name of sampler or witnessed by | Milum |
Title of sampler | QC Technician | Telephone number of sampler | Unknown |
Laboratory sample identification | 5074B | Linked DIME Sample ID | Unknown |
The fabricator/manufacturer/facility name | Robertsons Cabazon Quarry | Transportation Laboratory (TL) Number | C15 000007 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown | Structure unique identifier | Not set |
Structure name | Not set |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | SMARA 91 33 0008 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | Unknown | The fabricator/manufacturer designation for the sample | Unknown |
The plant number | Unknown | A detailed description of where the material sample was collected | Stockpiles |
Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 1-1/2 inch |
The concrete mix design number | Lot number | Not set | |
Sublot number | Not set | Aggregate Mix Number | Not set |
Submitted Tests
DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
---|---|---|---|---|---|---|---|---|
2015-05-13-9-1 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Vance Olsen, CT D08 - Fontana Southern Regional Laboratory | 06/04/2015 | Charles Mcdonald | No | Info | ||
2015-05-13-9-2 | CTM 206-October 2011: Method of Test for Specific Gravity and Absorption of Coarse Aggregate | Farzin Farah, CT D08 - Fontana Southern Regional Laboratory | 06/05/2015 | Charles Mcdonald | No | Info | ||
2015-05-13-9-3 | CTM 211-May 2010: Abrasion of Coarse Aggregate by Use of the Los Angeles Abrasion Testing Machine | Vance Olsen, CT D08 - Fontana Southern Regional Laboratory | 06/05/2015 | Charles Mcdonald | No | Info | ||
2015-05-13-9-4 | CTM 214-August 2010: Method of Test for Soundness of Aggregates by Use of Sodium Sulfate | Nemencio Daof , CT D08 - Fontana Southern Regional Laboratory | 06/17/2015 | Charles Mcdonald | No | Info | ||
2015-05-13-9-5 | CTM 227-June 2012: Method of Test for Evaluating Cleanness of Coarse Aggregate (Cleanness) | Nader Rashidi, CT D08 - Fontana Southern Regional Laboratory | 06/05/2015 | Charles Mcdonald | No | Info |
Sample File Attachments
File Name | Extension | Date Uploaded | Actions |
---|---|---|---|
No results found. |
Test File Attachments
DIME Test ID: 2015-05-13-9-1 CTM 202-November 2011
DIME Test ID: 2015-05-13-9-2 CTM 206-October 2011
DIME Test ID: 2015-05-13-9-3 CTM 211-May 2010
DIME Test ID: 2015-05-13-9-4 CTM 214-August 2010
DIME Test ID: 2015-05-13-9-5 CTM 227-June 2012