DIME - Sample Record for DIME Sample ID 2022-12-28-1

DIME » All Projects » Project - DEA: 080E33U4 » Sample 2022-12-28-1 » Sample Details

Sample Record

Owner Lab

CT HQ - QASI Los Angeles Field Office

DIME Sample ID 2022-12-28-1

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 214337 DEA: 080E33U4 EFIS: 0817000075
DIST-CO-RTE-PM	08-SBD-115-R7.3/R10.0
Award Date	04/26/2021
Closeout Date	Not set
Work Description	ADD WB AUX & EB DECEL LANES, WIDEN I15 SW CONNECT,RAMPS/BRDG
Location Description	SAN BERNARDINO COUNTY IN ONTARIO FROM 0.2 MILE WEST OF CUCAMONGA CREEK BRIDGE TO MILLIKEN AVENUE
QA Service Level	1 (Verified on 06/23/2021)

Sample Information

Sample Taken Date	12/28/2022	Sample Unique Key	1
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	01/09/2023
Sample type	Quality Assurance	A brief description of the sample	1-1/4 x 4-1/2 high strength bolt assembly
The quantity of what the sample constitutes	55	From where was the sample collected	Distributor
First name of sampler or witnessed by	Jacob	Last name of sampler or witnessed by	Garcia
Title of sampler		Telephone number of sampler	3109128014
Laboratory sample identification		Linked DIME Sample ID
The fabricator/manufacturer/facility name	St Louis Screw and Bolt	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form	L169-042-22	Structure unique identifier
Structure name

Material Information

Material Type	SMTL TM3 - Fastener Assembly	Rocap Number(s)	TT0160828
Heat Number(s)	Bolt-10761580 Nut-20792470 Washer-219375	Nut Mfg. Lot Number(s)	E934C1
Washer Mfg. Lot Number(s)	19397-219375	Bolt Specification	ASTM A325-1
Bolt Length(s)	4-1/2"	Nut Specification	ASTM A563-DH
Washer Specification	ASTM F436-1	Finish	ASTM A153/F2329 - Hot Dip
Diameter/Size	1-1/4"	Bolt Mfg. Lot Number	E598D1
Rocap Test Requirement(s)		Lubricant Requirements(s)

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2022-12-28-1-1	ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	spaine, CT HQ - Sacramento Structural Materials Testing Laboratory	01/13/2023	spaine	Yes	01/25/2023	A325 Wedge Tensile
2022-12-28-1-2	ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	<None>, CT HQ - Sacramento Structural Materials Testing Laboratory	01/13/2023	<None>	Yes	01/25/2023	Nut Proof Load
2022-12-28-1-3	ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Ruben Macias, CT HQ - Sacramento Structural Materials Testing Laboratory	01/25/2023	Ruben Macias	Yes	01/25/2023
2022-12-28-1-4	ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Ruben Macias, CT HQ - Sacramento Structural Materials Testing Laboratory	01/25/2023	Ruben Macias	Yes	01/25/2023
2022-12-28-1-5	ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Ruben Macias, CT HQ - Sacramento Structural Materials Testing Laboratory	01/25/2023	Ruben Macias	Yes	01/25/2023
2022-12-28-1-6	ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)	Ruben Macias, CT HQ - Sacramento Structural Materials Testing Laboratory	01/25/2023	Ruben Macias	Yes	01/25/2023
2022-12-28-1-7	ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)	Ruben Macias, CT HQ - Sacramento Structural Materials Testing Laboratory	01/25/2023	Ruben Macias	Yes	01/25/2023
2022-12-28-1-8	ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)	Ruben Macias, CT HQ - Sacramento Structural Materials Testing Laboratory	01/25/2023	Ruben Macias	Yes	01/25/2023
2022-12-28-1-9	ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Ruben Macias, CT HQ - Sacramento Structural Materials Testing Laboratory	01/25/2023	Ruben Macias	Yes	01/25/2023
2022-12-28-1-10	ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Ruben Macias, CT HQ - Sacramento Structural Materials Testing Laboratory	01/25/2023	Ruben Macias	Yes	01/25/2023

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2022-12-28-1-1 ASTM F606-21 (Verified)
DIME Test ID: 2022-12-28-1-2 ASTM F606-21 (Verified)
DIME Test ID: 2022-12-28-1-3 ASME B1.2-83r17 (Verified)
DIME Test ID: 2022-12-28-1-4 ASME B1.2-83r17 (Verified)
DIME Test ID: 2022-12-28-1-5 ASME B1.2-83r17 (Verified)
DIME Test ID: 2022-12-28-1-6 ASME B1.2-83r17 (Verified)
DIME Test ID: 2022-12-28-1-7 ASME B1.2-83r17 (Verified)
DIME Test ID: 2022-12-28-1-8 ASME B1.2-83r17 (Verified)
DIME Test ID: 2022-12-28-1-9 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-12-28-1-10 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-12-28-1-11 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-12-28-1-12 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-12-28-1-13 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-12-28-1-14 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-12-28-1-15 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-12-28-1-16 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-12-28-1-17 ASTM B499-09r21 (Verified)
DIME Test ID: 2022-12-28-1-18 ASTM E18-20 (Verified)
DIME Test ID: 2022-12-28-1-19 ASTM E18-20 (Verified)