Sample Record
Owner Lab
- CT D08 - Fontana Southern Regional Laboratory
DIME Sample ID 2022-12-15-11
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 214336 DEA: 07302404 EFIS: 0713000488 |
|---|---|
| DIST-CO-RTE-PM | 07-VEN-101-37/40 |
| Award Date | 11/17/2020 |
| Closeout Date | 09/24/2024 |
| Work Description | PADRE JUAN REHAB |
| Location Description | VEN 101 |
| QA Service Level | 1 (Verified on 02/26/2021) |
Sample Information
| Sample Taken Date | 12/15/2022 | Sample Unique Key | 11 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 12/21/2022 |
| Sample type | Verification | A brief description of the sample | JMF 3/4" RHMA-G 0.5% LAS |
| The quantity of what the sample constitutes | 3 Bags of Combined Agg., 2 bags of CRM | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Kevin | Last name of sampler or witnessed by | Hopkins |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | 0782G-22 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Granite - Santa Paula | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-19-0046 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | 1556 | A detailed description of where the material sample was collected | Belt Cut at Granite-Santa Paula |
| Where the material sample would have been placed if not sampled | Asphalt Paving | Primary Aggregate Nominal Size | 3/4 inch |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
|---|---|---|---|---|---|---|---|---|
| 2022-12-15-11-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Amir Behjati/ Seige. M, CT D08 - Fontana Southern Regional Laboratory | 12/27/2022 | Satish Jain | No | Combined Virgin Aggregate Grading | Info | |
| 2022-12-15-11-2 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 12/24/2022 | Satish Jain | No | Info | ||
| 2022-12-15-11-3 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | David Padilla, CT D08 - Fontana Southern Regional Laboratory | 12/27/2022 | Satish Jain | No | Info | ||
| 2022-12-15-11-4 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 12/24/2022 | Satish Jain | No | Info | ||
| 2022-12-15-11-5 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 01/06/2023 | Satish Jain | No | Info | ||
| 2022-12-15-11-6 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | Larry Diaz, CT D08 - Fontana Southern Regional Laboratory | 01/07/2023 | Satish Jain | No | Info | ||
| 2022-12-15-11-7 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Amir Behjati, CT D08 - Fontana Southern Regional Laboratory | 12/24/2022 | Satish Jain | No | Info | ||
| 2022-12-15-11-8 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 12/24/2022 | Satish Jain | No | Info |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2022-12-15-11-1 AASHTO T27-14
DIME Test ID: 2022-12-15-11-2 AASHTO T304-11
DIME Test ID: 2022-12-15-11-3 AASHTO T176-08
DIME Test ID: 2022-12-15-11-4 AASHTO T335-09r13
DIME Test ID: 2022-12-15-11-5 AASHTO T84-14
DIME Test ID: 2022-12-15-11-6 AASHTO T85-13
DIME Test ID: 2022-12-15-11-7 AASHTO T96-02r10
DIME Test ID: 2022-12-15-11-8 ASTM D4791-10